Agilent Turbo Pump 2000 L/s - Turbo-V 2300 TwisTorr

State: In stock

This large turbo pump is designed for scientific and research applications, where high pumping speed for N2 is important.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

The Agilent 2000 L/s turbo pump, Turbo-V 2300, offers the highest pumping speeds in its category for Nitrogen (N2). Utilizing leading-edge Twistorr technology, this large turbo pump achieves the highest compression ratios for light gases among commercially available turbomolecular pumps. Due to high foreline pressure tolerance, the pump can be backed by a smaller, cost-effective dry scroll pump like the Agilent TriScroll600.

This large turbo pump is designed for scientific and research applications, where high pumping speed for N2 is important.

The TwisTorr Turbo-V 2300 is operated with a dedicated full display rack controller.

Features

The Turbo-V 2300 solution comprises a stand-alone pump and rack-type display controller unit
Advanced rotor design in combination with TwisTorr technology reduces the number of pumping stage
Our unique monolithic rotor reduces material stress and improves assembly tolerances
Electrical motor reduces start-up time and improves pump stability under changing gas load conditions
Higher vacuum performance with lower heat dissipation
Advanced water cooling system
Optimized air cooling system
Clean maintenance-free vacuum
Utilizes Agilent's A-PLUS software (formerly T-plus)

Vacuum Performances

*Pumping speed for N2()**	N2: 2050 l/s
*Pumping speed for He ()**	N2: 1800 l/s
*Pumping speed for H2()**	1500 l/s
Compression ratio for N2	> 8 x 108
Compression ratio for He	8 x 105
Compression ratio for H2	4 x 104
*Base pressure (with recommended forepump)**	10-10 mbar (7.5 x 10-11 Torr) (**)
Max foreline pressure for N2	4 mbar
Inlet Flange	ISO 250F, CFF 12” O.D.
Foreline flange	KF 40 NW

Other

Nominal rotational speed
Nominal rotational speed	33300 rpm
Start-up time without gas load and with the recommended forepump	< 6 minutes
*Pumping speed for H2()**	1500 l/s
Minimum recommended forepump	TriScroll 600
Operational position	Vertical/Upside down
Operating ambient temperature	+5 °C to +35 °C
Bakeout temperature	120 °C (CFF), 80 °C (ISO)
Max rotor temperature	120 °C
Vibration level (displacement)	< 0.01 μm at inlet flange
Lubricant	Permanent lubrication
Cooling requirements	Water
Coolant water	Recommended flow: 200 l/h Temperature: +15 °C to +30 °C Pressure: 3 to 5 bar (45 to 75 psi)
Noise level
Storage temperature	-20 °C to +70 °C
Environment protection	IP54
Weight	ISO 250: 54.2 kg (119.5 lbs) CFF 12”: 55.3 kg (121.9 lbs)

(*): Without screen

(*): According to standard DIN 28 428, the base pressure is that measured in a leak-free test dome, 48 hours after the completion of test dome bake-out, with a Turbopump fitted with a CFF flange and using the recommended pre-vacuum pump

Controller Specifications

Input voltages
Input voltages	100-120 VAC, 220-240 Vac, 1-phase
Input frequency	50 - 60 Hz
Maximum input power	1300 VA
Output voltage	64 Vac
Output frequency	555 Hz
Output Power starting	560 W maximum
Output Power normal	450 W maximum
Weight (both models)	12.5 kg (28 lbs)
Installation category	II
Pollution degree	2