DT-315P Stroboscope

State: Out of stock

Extruded aluminum, NEMA 4X construction: Extraordinary durability yields long service life
Internal battery supply: Lightweight; enables easy portability

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

Extruded aluminum, NEMA 4X construction: Extraordinary durability yields long service life
Internal battery supply: Lightweight; enables easy portability
Repeatable accuracy (± 0.01% of reading): Fully meets the strictest tolerances
Phase shift (in degrees of delay time): Enables visual analysis of rotating/reciprocating objects through all points of motion/time/angle
Flash timer control: Prolongs flash tube life
Manual flash controller knob: Permits easy/accurate adjustments to flash rate
Continuous duty cycle: Eliminates downtime waiting for unit to cool
Highly polished focused reflector: Prevents “blind” viewing areas

Internal Mode	Model	DT-315P
	Flashing Range	60.0 ~ 3,000 FPM
	Display Accuracy	±0.01%
	Drift	± 0.01 (at 0 ~ 40° C)
	Phase Shift	Use +/- push buttons (360° in 6 seconds)
	Display Update Time	0.2 sec approx
	Output Signal	Approx. 12V
	Other Functions	÷2. x2 Flashings, Phase shift adjustment
External Mode	Flashings	Synchronous Mode: 60.0 ~ 3,000FPM / Delay mode:200 ~ 3,000 FPM
	Delay Angle Setting Range	Delay Mode: 0 ~ 359°, Set by 1°
	Display	RPM, Synchronous mode: 60.0 ~ 3000FPM Delay Angle, Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display
	Display Accuracy	Synchronous mode: ± 0.01% plus ± 1 digit Delay mode:+ 0 -0.2mS plus ± 1 digit
	Update Time	1 per second
	Input Signal	H Level:2.5 ~ 12V L level:0 ~ 0.4V 50 μs or over for H.L. level Trigger at rising edge Approx. 10Ωimpedance
	Sensor Power	Battery:6.8 ~ 11.0V Adapter:10.2 ~ 12.2V DC:9 ~ 14.5V : 7.8 ~ 14.1V Max. 40mA (including max 0.6V Ripple)
	Setter	Flashing, Delay angle: Jog Shuttle Mode, Display Unit: Tact Switch
General	Display	5 digit, 7 segment red LED (Character height 10mm)
	Flashtube	Xenon lamp TFU-100B-A32
	Flashtube Power	Max. 10W
	Flashing Time	Approx. 30 μ sec
	Power	Battery: Nicd battery, 8KR – 2000 sce SANYO, Operating time: Approx. 1 hour (full charge at 3000 FPM); Battery Charge Time: Approx. 10 hours Do not operate over 10 hours continuously
		External power: Disconnect the built-in battery before operating instrument by external power)
		DC9 14.5V, Max. 24W (current consumption is 24W/input voltage) or operate by provided adapter; AC115V 10%, 50/60 Hz Max. 40VA
	Operating Temperature	32° to 104° F (0° to 40° C)
	Power Requirement	Power Plug & Cable for Recharging Battery Included
	Dimensions	5.11” W x 6.22” H x 10.20” L (130 W x 158 H x 259 L mm)
	Product Weight	Approx. 4.6 lbs (2.1 kg)
	Package Weight	6.15 lbs (2.79 kg)
	Warranty	2-Year
	Included Accessories	Input/Output signal plug, rechargeable battery with AC adapter, protective case