Support of quick and easy measurements

There many functions to express characteristics of vibration. However, it is necessary for the conventional vibrometers that same point is measured plural times switching objective functions one by one.
CardVibro which has simultaneous measurement function can measure Displacement, Velocity, Acceleration and Acceleration Envelope for Bearing Condition Assessment simultaneously just being pressed on the measurement start key.

For investigation of cause of vibration

If the measured magnitude of vibration is too large, cause investigation by FFT is recommended. CardVibro Neo is possible to perform Frequency Analysis only by the minimum condition setting . Try fine analysis with 1600lines on the small body. CardVibro Neo could be your strong handheld weapon to root out the harmful vibration.

Important basic function

All Data acquired can be saved. If the PDA compatible to the storage card as SD card is used, more Data are possible to be saved. Data can be transferred to P.C. for more efficient handling by using Data handling software.

Check by ear

This is a function that we would like people who judge bearing conditions with acoustic rod to use. By just connecting to headphone / earphone, sound is listened with vibration measurement.

Judgement just after measurement

Vibration measurement for condition check of rotational machines such as blower or motor, everyone wants to judge condition with measured data immediately. However, you cannot judge in the first measurement. You can diagnose with bearing judging value set for Card Vibro Air by ISO-10816[JIS-B-0906] Standard, vibration severity and the world's largest bearing maker, SKF.

Figure out vibration variance at one view

Rolling phenomenon has characteristics on its waveform, so you can recognise at one view. You can record the waveform up to 10 sec.

Play three Vibration Measuring uses only with this one

We have prepared three principle pickups, which are accelerometer corresponding to wide frequency range, electro-dynamic velocity type suitable for small displacement measurement, and Piezo-resistive type suitable for low frequency. Vibration Measuring which used to be used according to uses will be one.

You cannot be satisfied with only measuring vibration

Display of CardVibro Neo is changeable to the PDA function when the pocket calculator is required for the frequency calculation or the schedule is checked during the measurement on site. If the data is renewed, the schedule will be updated synchronized with PC. Versatile PDA application will be available for your job.

General Specifications