Turbo Pump Agilent 800 L/s, TwisTorr 804 FS

State: In stock

This 800 L/s turbomolecular pump with ISO 200K, 250K and CFF 10 in inlet flanges, is perfectly suited for a wide range of applications, including research and development, UHV systems, nuclear research, ion implanters, surface analysis, electron microscopy, and cryogenics.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

The Agilent 800 L/s turbomolecular pump, TwisTorr 804 FS, combines TwisTorr drag stage technology and Agilent Floating Suspension (FS) to provide high performance, reliability and economy. This turbo pump delivers high vacuum performance thanks to the synergy between turbo technology and innovative TwisTorr drag stages. Floating Suspension assures low vibration and acoustical noise for compatibility with sensitive instrumentation and work environments.

The TwisTorr 804 FS is available with onboard or rack controllers.

Features

Innovative TwisTorr technology - high compression ratio for light gases provides high performance and minimal system footprint.
High foreline tolerance - permits use of smaller backing pump, thereby reducing system cost and size.
Agilent Floating Suspension - low vibration and acoustical noise as well as optimal bearing working conditions extend operating life to optimize cost-of-ownership, minimize system downtime, and assure stable performance over time.
Unique bearing and dry lubrication - maintenance free, oil free; allows installation in any orientation.
“Three dimensional” pump control software provides maximum flexibility, speed, and simplicity - for the best throughput and compression performance according to the operating conditions of the pump.

Pumping speed:	ISO200K-F	ISO250K-F	CFF10
N2 He H2 Ar	720 L/s 660 L/s 485 L/s 690 L/s
*Max Gas Throughput()**	Air Cooling (25°C Air temperature)	Water Cooling (15°C Water temperature / 25°C room temperature)
N2	4.3 mbarL/s 255 SCCM	6.1 mbar L/s 367 SCCM
He	7.9 mbar L/s 467 SCCM	10.4 mbar L/s 615 SCCM
Ar	1.5 mbar L/s 89 SCCM	3.3 mbar L/s 195 SCCM
(*) Backing pump 11.6 m3/hr
Compression ratio and foreline tolerance*
N2 He H2 Ar	>1E+11 2E+08 3E+06 1E+11	10 mbar 10 mbar 4 mbar 8.5 mbar
(*) Foreline Tolerance defined as the pressure at which the turbopump still produce a compression of 100 and estimated in water cooling mode
Base pressure with recomm. forepump	< 1 x 10-10 mbar (< 1 x 10-10 Torr)
Inlet flange	ISO 200K, ISO 200F, ISO 250K, ISO 250F, CFF 10”
Foreline flange	NW25 or NW40
Recommended forepump	DS302 IDP10 IDP15
Operating position	Any
Oper. ambient temperature	+5 °C to +35 °C
Lubricant	Permanent grease lubrication
Cooling requirements
Air cooling	Air temperature from +5°C to 35°C
Water cooling	Water temperature from +15°C to +25°C Water flow min. 100L/h
Noise Pressure Level (at 1m at full speed)	43dB(A)