Low Frequency Vibration Signal Conditioner (for Low band vibration measurement)

State: In stock

A compact Signal Amplifier to make optimal signal processing being connected with the Servo type Accelerometers.

It is used for Vibration Acceleration Measurement, Waveform Observation, for various Analysis in combination with the AC Voltage Meter, Oscilloscope, FFT Analyzer respectively.

Furthermore, Voltage signals from the Microphones or Sound Level Meters can be output to the instruments like Recorders along with the Vibration Signals.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Comments

Very Light Weight・Compact Design (920g)
6 Channels (Vibration Signal Inputs) ＋２Channels (Voltage Signal Inputs)
Connectable to 3 Axis Pickup
Sensitivity Range Change-over ＋Low-pass Filter
High Signal / Noise Ratio
Connectable to Wave Stocker

■ For Performance Improvement of Ultra Precision Equipments as of Semiconductor Production FacilitiesBest suitable for Measurements of Micro Tremor of the ground or bridges, Vibration of Floor, Evaluations of Vibration Isolation Effects.

Category	Functions	Descriptions	Details
Amplifier	Measurement Channel	Vibration Input ×6 (CH1 ～ CH6) Voltage Input ×2 (CH7 ～ CH8)	Voltage Inputs from Servo type Accelerometer (Single Axis type, 3 Axis type), Noise Level meter, Pressure meter, Thermo meter,
	Input Combination	CH1 ～ CH6 AC/DC CH7 ～ CH8 DC	CH1 ～ CH6 AC: 0.1Hz ～DC, :Zero Adjustment・Gravity Acceleration Cancellation DC only CH7 ～ CH8 DC only
	Frequency Response	CH1～CH6 0.1Hz/DC～12Hz（±0.5dB） 0.1Hz/DC～30Hz（±0.5dB） 0.1Hz/DC～60Hz（±0.5dB） CH7～CH8 DC～12Hz（±0.5dB） DC～50Hz（±0.5dB）	CH1 ～ CH6 Variable Low-pass filter to be set as fc=20Hz. 50Hz. 100Hz CH7 ～ CH8 Low-pass filter to be set on or off of fc=20KHz
	Measurement Range	CH1 ～ CH6 0.01m/s²・0.1m/s²・1m/s²・ 10m/s² CH7 ～ CH8 ±5V Full Scale Voltage Signal	―
	Output Signal	±5V Full Scale Voltage Waveform Signal	2 Signal Routes (for Recorder, for Waveform Data Acquisition, Analysis)
	Linearity	±0.5% Full Scale	―
	Inter Range Error	±2%	―
	S / N Ratio	60dB～100dB or more	>100dB(Measurement Range:10m/s²)
			>96dB(Measurement Range:1m/s²)
			>80dB(Measurement Range:0.1m/s²)
			>60dB(Measurement Range:0.01m/s²)
	Calibration Signal Output	12Hz Full Scale equivalent	Calibrated for 0.01m/s² Range
	External Control	Measurement Range Low-pass Filter	Controlled by TTL level Signal
	Power	9 ～12VDC, 2A	―
	Power Consumption	4W	Increases by（0.8×Axis Number） watts connected with Pickups
	Ambient Environment	0～＋50℃	―
	Outer Size	240(W) x 150(D) x 35(H) mm	―
	Mass	Approx 920g	―