Power Specifications1 |
|||||
90C-A3 |
90C-A4 |
90C-A5 |
90C-A6 |
90C-K |
|
Wavelength (nm) |
|||||
Multiline Visible |
3.0 |
4.0 |
5.0 |
6.0 |
_ |
Multiline Red |
_ |
_ |
_ |
_ |
0.75 |
1090.0 |
0.03 |
0.04 |
0.05 |
0.07 |
- |
793.1-799.3 |
- |
- |
- |
- |
0.03 |
752.5-799.3 |
- |
- |
- |
- |
0.25 |
752.5 |
- |
- |
- |
- |
0.10 |
676.4 |
- |
- |
- |
- |
0.12 |
647.1 |
- |
- |
- |
- |
0.60 |
568.2 |
- |
- |
- |
- |
0.15 |
530.9 |
- |
- |
- |
- |
0.20 |
528.7 |
0.25 |
0.30 |
0.35 |
0.42 |
- |
520.8 |
- |
- |
- |
- |
0.07 |
514.5 |
1.40 |
1.70 |
2.00 |
2.40 |
- |
501.7 |
0.20 |
0.30 |
0.40 |
0.48 |
- |
496.5 |
0.40 |
0.50 |
0.60 |
0.72 |
- |
488.0 |
1.00 |
1.30 |
1.50 |
1.80 |
- |
482.5 |
- |
- |
- |
- |
0.03 |
476.5 |
0.40 |
0.50 |
0.60 |
0.72 |
- |
476.2 |
- |
- |
- |
- |
0.05 |
472.7 |
0.06 |
0.12 |
0.20 |
0.24 |
- |
465.8 |
0.05 |
0.10 |
0.15 |
0.18 |
- |
457.9 |
0.20 |
0.30 |
0.35 |
0.42 |
- |
454.5 |
- |
0.05 |
0.12 |
0.14 |
- |
406.7-415.4 |
- |
- |
- |
- |
0.15 |
337.5-356.4 |
- |
- |
- |
- |
0.15 |
333.6-363.8 |
- |
0.20 |
0.30 |
0.50 |
- |
Beam Specifications2 |
||
Argon |
Krypton |
|
Beam Diameter (@ 1/e2 points)3 |
1.5 mm |
1.5 mm |
Beam Divergence (full angle) |
0.5 mrad |
0.8 mrad |
Beam Waist Diameter4 |
1.4 mm |
1.1 mm |
Beam Waist Location4 |
1.50 m |
1.27 m |
Cavity Length |
||
Single-line |
1.16 m |
1.16 m |
Multiline |
1.14 m |
1.14 m |
Long Term Power Stability5 |
||
Light Regulation |
+/- 0.5% |
+/- 0.5% |
Current Regulation |
+/- 3.0% |
+/- 3.0% |
Optical Noise (rms)6 |
||
Light Regulation |
0.2% |
0.2% |
Current Regulation |
0.2% |
0.2% |
1 All powers are listed in Watts. Guaranteed power specifications for standard systems are indicated in bold print. All power specifications, except multiline visible and IR, are TEM00.
2 All beam specifications are measured at specified output powers at 514.5 nm for argon lasers and 47.1 nm for krypton lasers.
3 Beam diameter is measured at the output-coupler mirror.
4 Inside the resonator, the beam waist is located at the flat high reflector. The long-radius output coupler acts as a weak lens to transfer the output-beam parameters. The values listed for beam divergence, beam waist diameter and beam waist location take into account the weak lens effect. The value for beam waist location is measured from the output coupler toward the high reflector.
5 Maximum peak variation over any 30 minute period after a 2-hour warm-up.
6 Measured with a 10 Hz to 2 MHz photodiode driving a resistive load at
514.5 nm for argon systems and 647.1 nm for krypton systems.
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.