① Improvement of performance

Improvement in excitation force.

When compared with the conventional i & J series, the A series increases the relative excitation force.

• Increased force per system power requirement
• Increased force per system mass
• Increased force per system size

Standard 76.2mmp-p displacement

*Only for A30,A45, A65

A-series has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement. This single system can be used in a very wide variety of tests.

Increase in frequency range

A-series has wider frequency range than conventional systems.(Secured stroke of A30, A45 & A65 is 76.2 mmp-p based on mechanical stroke 82 mmp-p)

Cross-axis acceleration reduction

A series dramatically reduces cross-axis (crosstalk) acceleration (horizontal vibration). Highly accurate testing is achieved.

High velocity shock testing　

*Only for A30,A45, A65

A-series(EM amplifier model)provides a maximuim of 3.5m/s shock velocity testing which has not been possible with standard conventional systems(i,J-series).

② User friendly and Secure

Lower power consumption

In comparison with the same class of conventional systems (i,J-series), the A-series achieves lower power consumption. With an automatic energy-saving function increased energy saving is achieved across all force ranges.

International safety standards

A-series complies with international safety standards.

② User friendly and Secure

Rapid creation of a test from a set of pre-defined templates conforming to most international test standards.

Remote monitoring of the test status over the internet.

The status of the test, and the amplifier or shaker operation can be viewed on a remote PC using a standard internet browser. 
Problems or errors are easily identified.

Các mẫu bàn rung