The hand-held measuring head XRS H 21 belongs to the standard accessories of the hydrogen leak detector XRS 9012. The actual sensor is located at the tip of the hand-held measuring head, which is connected to the leak detector via a cable. The measuring device responds as soon as trace gas reaches the hand-held measuring head.
The XRS H 21 is perfectly suited for pinpoint leak detection and can also be used in combination with the standard carry handle XRS P 12.
Master data |
|
Article number |
XRS000H21 |
H2 gas [ppm] |
|
Min. measuring range |
0,7 |
Max. measuring range |
— |
Response sensitivity |
0,7 |
Resolution |
— |
Response time [s] |
< 1 s |
Pump kit |
|
Pump capacity standard [l/min] |
— |
Power supply |
— |
Power input [kW] |
— |
Battery capacity standard ([h] > 0°C) |
— |
Battery capacity at maximum pump performance ([h] > 0°C) |
— |
Dimensions of sensor element |
|
Length [mm] |
100 |
Diameter Ø [mm] |
18 |
Material of sensor element |
|
Stainless steel |
— |
Other |
√ |
Material of handle |
|
Plastic |
— |
Interfaces/plug design |
|
SDI connector |
— |
Special 5-pin plug |
√ |
Surrounding conditions (measuring electronics integrated in handle) |
|
Operating temperature min. [°C] |
-20 |
Operating temperature max. [°C] |
50 |
Weight (packing excluded) |
|
Weight [kg] |
— |
STANDARD SCOPE OF DELIVERY |
|
Hand sensor |
|
Option |
√ |
Hand sensor with integrated connection cable |
|
Option |
— |
Ground sensor with active suction pump and integrated connection cable |
|
Option |
— |
ASCERTAINABLE MEASURED VALUES AND FUNCTIONS |
|
Internal sensors |
|
H2 hydrogen gas [digits] |
√ |
Functions and equipment |
|
Flexible gooseneck |
— |
Integrated connection cable |
— |
Screw-on hollow extension rods |
— |
Functional knob with connected active suction pump |
— |
Rubber cuff for better sealing |
— |
Shielded sensor tip for penetration of soft ground |
— |
Robust sinter filter for sensor protection |
√ |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.