●  Measurement Possibilities: Rate deviation, amplitude and beat error of mechanical watches. Diagram of the beat noises.

●  Beat Error: Automatic selection of all common beat numbers. Manual selection of less common beat numbers.

    Manual selection of any beat number between 3‘600 to 43‘200 b/ h. Determination of an unknown beat number.

●  Measuring Modes: Standard mode for watches with the Swiss escapement (Stnd), Mode for watches with coaxial

    escapement (Spe1), Mode for watches with AP escapement (Spe2), Mode with specifc amplitude flter (Spe4), only

    the rate measurement occurs (Rate).

●  Display: Cont Continuous diagram recording of the beat noises and display of the numeric values for the rate accuracy,

     amplitude and beat error. The last five screen contents are callable. Vario Enables to examine the stability and scattering

     of the rate accuracy or the amplitude over a long period of time (max. 100 hours).

●  Automatic Gain Control: Manual control facility for watches with stray or unusual beat noises.

●  Rate accuracy: numerical display in s/d. Resolution: 1 s / d with a measuring range of ± 999 s / d or 0.1 s / d

    with a measuring range of ± 99.9 s / d.

●  Amplitude: numerical display in degrees. Resolution 1°. Measuring range from 70° to 360°.

    Lift angle adjustable from 10° to 90°.

● Beat error: numerical display in milliseconds. Resolution 0.1 ms. Measuring range 9.9 ms.

● Diagram: recording on a illuminated LCD graphic display with 256 x 64 dots. Time scale adjustable from 1 up

    to 9 mm / ms (zoom). 4 selectable tracing speeds.

● Functions: Selectable measuring time for numerical results: 2, 4, 8, 10, 20, 30, 60 s and automatic selection of the

   shortest possible measuring time. Continuous renewal of the average values every 2 s over the measurement period.

    Display on the screen of the evaluated part of the rate measurement diagram.

● Acoustic check: built in loudspeaker to hear the beat noises.

● RS232-interface: for the connection of a PC, GPS receiver or our printer to print out of the numeric results or graphic

    print out of the displayed diagram.