Finger Print Temperature & Humidity Chambers JEIO TECH TH-PF-100 (100L)

State: Out of stock

Exceptional design for Ninhydrin, DFO and other fingerprint development processes.
Highly precise controlled microprocessor PID controller for rapid performance.
Advanced safety features for protecting evidence. A clear display with LED light indicator and heated glass window.

Warranty: 12 months

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Accessories
Comments

Temperature & Humidity Control Range

: TH-PF-100; ● 80 ~ 90% RH at 40℃
● 65 ~ 95% RH at 50℃
● 50 ~ 95% RH at 60℃
● 50 ~ 90% RH at 90℃

Safety Features

● Built in door lock for crucial evidence.
● Automatic shut off after overheat alarm.
● Low and empty water level alarm.
● Power supply leakage breaker.
● Over current protection.
● Overheat protection.
● Door open alarm.

Operating Features

● Microprocessor PID control / Auto-tuning / Calibration.
- Precise temperature & humidity control.
- Faster fingerprint development.
- Rapid recovery time after door has been opened.

● User friendly LCD controller.
- Set value and present value are clearly visible together on display.
- Operating progression visible in graph mode allow for direct data interpretation.
- Temperature and other operating parameters recorded with use of an optional recorder. (optional)

● Sufficient programmable control support.

Description	TH-PE
Programmable Pattern Capacity	10
Pattern Repeat Time	999
Max. Segments per a Pattern	100
Available Max. Segments*	100
Programmable Process Time per a Segment	0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000, so you need to arrange the number of segment and patterns properly.

● Intuitive control panel.
- Sight Lamp, Window Clean, and Water Level indicators.

● Digital timer with alarm
- Start / Reset button for easy operation.
- Wide display for easy visual of time remaining.
- Set time expired alarm.

● Computer interface.
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings, recovery, temperature, humidity values.
- RS-232 communication port comes standard.

Constructional Features

● Light weight and compact design with high performance.

● Corrosion resistant stainless steel chamber.

● Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.

● Maintenance of water supply are easily performed with a front water tank.
- Water level check indicated by water level bar in the tank.

● Water supply during operation is also available for long term test purposes.
● Direct water system provides user great convenience when performing long-term tests. (optional)
● Clear observation of fingerprint development processes.
- Tempered glass door with built in wire heater.
- Energy efficient, long lasting LED lighting.
- Easy operating lamp button.

● Cable port for introduction of external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)

● Stand with casters allow for space-saving. (optional)
● Chambers stackable, up to two levels.

Model		TH-PF-100
Chamber Volume (L / cu ft)		100 / 3.53
Controller		PID control (LCD Type)
Temperature	Range (℃ / ℉)	40 to 100 / 104 to 212 without humidity 40 to 90 / 104 to 194 with humidity
	Fluctuation (±℃ / ℉) at 100℃	0.5 / 0.9
	Variation (±℃ / ℉) at 100℃	0.5 / 0.9
Humidity	Range (%RH)	FULL RANGE : 50 to 95 80 to 90 at 40℃ (104℉) 70 to 95 at 45℃ (113℉) 65 to 95 at 50℃ (122℉) 50 to 95 at 60℃ to 80℃ (140℉ to 176℉) 50 to 90 at 90℃ (194℃)
	Fluctuation (±%RH)	3
	Variation (±%RH)	3
Heater	Material	Ni-Cr Wire Heater / SUS cartridge Heater
	Drying Bulb	400W
	Humidity Bulb	400W
Sensor	Temperature	Pt 100
Sensor	Humidity	Electronic sensor (free of drying a wet pack and good response time)
Air Flow		2 set of sirocco fan (60W)
Material	Interior	SUS #304 (2B polish)
	Exterior	SUS #304 & Steel, 1t, Double painted & baked
	Insulation	Polyurethane (70mm)
	Door	Glasswool
Water Tank	Capacity (L / cu ft)	9 / 0.32
Water Tank	Quality	pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below
Viewing Window (mm / inch)		280×430 / 11.02×16.9
Cable Port		Basically one hole provided / Ø 50mm (2")Optionally max. two holes available/ Ø 50 or 80mm (2 or 3.2")
Interface		Basically RS-232C [RS-485 [Maximum 9 Units Control] - optional]
Dimension (W×D×H)	Interior (mm / inch)	500×380×530 / 1.97×15×20.9
	Exterior (mm / inch)	670×845×1045 / 26.4×33.3× 41.15
	Net Weight (kg / lbs)	115kg±5kg / 253.5±11
Electrical Requirements	AC230V, 1ph, 60Hz	4.5A
Cat. No.		AAH82331K
Electrical Requirements	AC230V, 1ph, 50Hz	4.3A
Cat. No.		AAH82332K