SERIN/CA. Unit

State: Out of stock

The SERIN/CA trainer consists on a Control Interface Box connected to a
three-phase motor and to a computer (PC) (computer not included).
The control interface has a resolver for three-phase motors that controls the speed,
position and current of the motor.
The RS232 communication between the control interface and the PC provides the SERIN/CA the
possibility of commanding the motor from the PC and visualize the most important signals of the motor.
Velocity, Position and Torque Control.
It allows predefined moves and programming.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

Control Interface Box:

Front panel	3 Digital outputs: They have a green LED that indicates if the output is active or not. Two of them have some functions defined by defect, but they can be changed by any other function using the software. Output 1: this output has the “Fault Reset” function enabled for defect. It can be used to indicate a problem with the drive. Output 2: this output has the “Brake” function enabled.
	Emulative encoder outputs: Two pair of outputs (CH A Out, CH B Out and their respective denied outputs) that are TTL signals of incremental position generated by the resolver feedback. These outputs are in quadrature to simulate an optic encoder. One pair of outputs (CH Z Out and their denied) that TTL works as marker of pulses
	Analog output 4 (relay): this output is a relay, and it belongs together with the output 4 that it can be in the software inside the I/O digital label.
	Analog outputs of the DAC monitor: these analog outputs are monitored points of general character. Each DAC monitor can be controlled by software to be a certain value of the internal variables.
	6 Digital inputs: digital inputs for those signals that are introduced to enable the different available functions in the software.
	6 Buttons: they are good to enable the digital inputs. When the button is pressed, the digital input will be activated, making what has been defined by the software
	6 Switches: they have the same function as the buttons, but with the only difference that they are switches and, therefore, maintain the position fixed (open or closed).
	Switch outfitter of digital inputs: there is a switch that enables the digital inputs. When the green LED is on, the inputs will be enabled.
	Analog input: this input allows an analog use directly of the user. It is an A/D input.
	Voltage supply: 3 sources of continuousin the unit. One of +24 V. DC, another of +12V. DC and other of -12V. DC.
	2 Potentiometers: they present three pegs
	Ignition switch: when the unit is on, the red LED is active an lighting.
Back panel:	Voltage supply that feeds the unit with 220 V of alternating current.
	Three-phase output when solving: it is a three-phase output that feeds when you are solving and, therefore, allows their movement.
	Connection port in series: it is a connection peg to connect the unit with the PC by the port in series, in order to allow the software to manage the encoder.
	Connection with the feedback: it is a connection with the motor feedback. It allows the encoder to manage the motor.