Sentinel™ Multiscan Metal Detector

State: In stock

Overcome the limitations of fixed single or dual frequency metal detectors with the Thermo Scientific™ Sentinel™ Multiscan Metal Detector, a multi-frequency metal detector for industrial food product inspection. By scanning up to five user-selectable frequencies running at a time, the Sentinel multi-frequency metal detector provides unmatched sensitivity and the highest probability of finding ferrous, non-ferrous, and stainless steel metal contaminants in challenging applications such as dairy, meat, poultry, bread, and other foods with high product effect.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

Frequency Range 50 to 1000 kHz, Multiscan runs up to five frequencies
Identifies contaminants that are up to 70% smaller in volume than previous technologies, including the Thermo Scientific™ APEX 500 metal detector, and has the same dimensions and mounting for easy upgrade
Easy-to-use touchscreen with set-up wizards to reduce set-up time
Detailed graphical displays for phase, rejects, quality test, and detection thresholds to enable easy fine tuning and troubleshooting
IP69K for severe washdown and dust, eliminating repair costs
All electronics are integral, so mounting is easy and flexible
All balance functions are implemented in software, so no need for manual, hardware rebalance in the field
Wide ambient temperature range assuring reliability
Fe, non-Fe and 316 SS test pieces included to fit specific application

SENTINEL5000
Flange Option	Metal Free Zone 1.5-2X smallest aperture dimension, can be reduced with optional flanges
Description	Sentinel Multiscan Metal Detector
Aperture Size	Width: 75 to 2000 mm, Height: 75 to 600 mm. Increments of 25 mm up to 200 mm and 50 mm above 200mm Foot Pattern and Aperture Placement Same as APEX 500 Metal Detector for easy upgrade
Sensitivity	Detects contaminants up to 70% smaller in volume than APEX 500 (subject to application testing)
Certifications/Compliance	Export and Safety cCSAus, CE
Communications	Human Machine Interface (HMI); 7 in (178 mm) diagonal, high-intensity color touchscreen USB Port Watertight USB 2.0
Construction	Stainless steel 304 straightline finished case and front panel, HD option utilizes 316 stainless steel. Optional three aperture liner styles for harsh washdown and high temperature applications.
Electronic Supply	100 volts to 240 volts AC single phase plus earth ground; 50 Hz to 60 Hz, 0.6 to 1.2 amps
Input Types	8 Inputs; Active 24VDC switch selectable as NPN or PNP
Manufacturing Quality	ISO9001 certified
Operating Temperature	Metal Detector Ambient Temperature -10° to +40°C (+14° to +104°F) Product Temperature in Aperture -10° to +55°C (+14° to +131°F), HD option maximum 40°C (104°F), PVDF option maximum 120°C (248°F) Maximum Washdown Temperature 55°C (131˚F), HD option 65°C, PVDF liner option cannot be washed down (dry applications only)
Output Types	8 relay outputs; 250 volt AC 2 amp max. 50 volt DC 1 amp max8 digital sourcing (PNP) outputs, 24VDC with capacity of any two at 500 mA, the rest at 30 mA average each
Product Speed	0.5 m/min (1.7ft/min) to 80 m/min (262 ft/min). Encoder input highly recommended.
Protection	IP69K, HD option includes thermal shock protection
Relative Humidity	20% to 80% non-condensing, one way breather valve standard
Input Allocation	Speed Sensor, Infeed Photo Eye, Reject Confirmation 1 and Bin Full, External Alarm, External Reset
Output Allocation	Reject 1, Reject 2, Fault, Alarm, Warning