● Microprocessor PID control ensuring consistent shaking motion and precision accuracy.
● Speed range from 150 to max. of 1500 rpm.(depend on a choice of interchangeable blocks)
● Simple temperature calibration.
● Memory function of programmed protocols allowing relevant parameters (such as temp., rpm, time) of each protocol step to be stored.
- Up to 10 protocols allowed for memory storage.
- Up to 10 steps allowed for each protocol.
- Interval Mix function (continuous switching between shaking and phasing)
● Two types of timer modes:
- Timer 1 starts immediately after the timer setting.
- Timer 2 starts only after reaching the set temp.
● Bright VFD display with responsive touch buttons.
● Its polypropylene main body is highly chemical-resistant and easy-to-clean.
● Optimal heat transfer is achieved by the tight coupling design of the main body and the corrosion-resistant anodized aluminum blocks.
● Low-profile design with rubber feet for minimal vibration and noise.
|
Model |
CBS-350 |
||
|
Control |
Feedback control PID |
||
|
Display |
VFD(0.1℃ resolution) |
||
|
Temperature |
Range (℃ / ℉) |
Amb. +5 to 100 / 41 to 212 |
|
|
Fluctuation at 37℃ (±℃ / ℉) |
0.5 / 0.9 |
||
|
Variation at 37℃ (±℃ / ℉) |
0.15 / 0.27 |
||
|
Heating power (W) |
360 |
||
|
Safety |
Over Temp. |
Heating plate |
|
|
PCB |
|||
|
Over Current |
Current limit protection |
||
|
Shaking System |
Motion Type |
Orbital |
|
|
Speed range (RPM) |
96-well tube block |
150 to 1500 |
|
|
0.5ml tube block |
150 to 1000 |
||
|
1.5ml tube block |
150 to 1000 |
||
|
50ml tube block |
150 to 800 |
||
|
Orbit Size (mm / inch, dia.) |
2 / 0.08 |
||
|
Dimension |
Overall (mm / inch) |
249 x 325 x 120 / 9.8 x 12.8 x 4.7 |
|
|
Net Weight (Kg / lbs) |
8.3 / 18.3 |
||
|
Electrical requirements (230V,50Hz/60Hz) |
1.7A |
||
|
Cat. No. |
AAHJ4015K |
||
|
Electrical requirements (120V,60Hz) |
3.4A |
||
|
Cat. No. |
AAHJ4013U
|
||
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
