No.551 CROSS CUT EXFOLIATION TESTER
This tester is used to evaluate the adhesion of coated film according to the cross cut method. The operator is to check and evaluate the surface of the coated film after it has been grid cut until the cut reaches the basis material. Since the tester cuts electronically, it will allow the operator to have accurate test results.
No.551-AUTO
CROSS CUT EXFOLIATION TESTER (AUTOMATIC)
This model can automatically cross cut the coated film.
The AUTO-1 model can be set the number of cuts and the cut pitch, and the AUTO-2 model will turn the specimen 90° automatically. Both models can enable more accurate testing than its manual counterpart.
| Model |
No.551
CROSS CUT EXFOLIATION TESTER |
No.551-AUTO
CROSS CUT EXFOLIATION TESTER (AUTOMATIC) |
|---|---|---|
| Specimen Base | 90 × 90 mm, 90° Rotation (Manual) | AUTO-1： 90 × 90 mm, 90° Rotation (Manual) AUTO-2： 90 × 90 mm, 90° Rotation (Automatic) |
| Stroke |
Left-Right Max. 50 mm, Front-Back Max. 50 mm
|
|
| Scratching Pitch | 0.5, 1.0, 1.5, 2.0 mm (Manual) |
0.5, 1.0, 1.5, 2.0 mm (Motorized, 4 Stage Type) |
| Scratching Speed | 10 mm/s (Option: 4 Stage Type) |
5, 10, 15, 20 mm/s (4 Stage Type) |
| Scratching Number |
-
|
Variable by Counter (Standard: 6, 11 lines) |
| Weight Load |
10 gf to Max. 350 gf (Balance Weight)
|
|
| Needle |
φ3 mm, L23 mm, Top Angle 60°
|
|
| Option |
Conduction Device, Cutter Setting Jig, Length Setting Sensor, Safety Cover
|
|
| Power Source |
AC 100 V, 1-Phase, 5 A, 50/60 Hz
|
|
| Dimensions/ Weight (Approx.) | W320 × D230 × H440 mm, 20 kg | AUTO-1： W410 × D460 × H600 mm, 20 kg AUTO-2： W410 × D460 × H600 mm, 25 kg |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
