RAPID NX

State: In stock

The RAPID NX offers <15 ps pulses in a newly designed package that is not only cost effective, but also fit for the most demanding 24/7 industrial applications.

The RAPID NX is a next generation picosecond laser system that encompasses all features of the existing RAPID laser at a significantly reduced cost. Hence, it is ideally suited for precision micromachining applications where the ablation quality and system cost are of the highest priority.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

7W at 1064 nm
Repetition rate range from 50 kHz to 1000 kHz
Up to 50µJ pulse energy
Pulse on demand
Burst mode
High beam quality M2 < 1.3
Superior beam parameter and pointing stability across the complete PRF range
Fully field serviceable
Low maintenance

Specification	Value	Comments
Fundamental center wavelength	1064.5 nm +/- 0.5 nm
Output energy	7 µJ @ 1064 nm, 1 MHz (7W) 12 µJ @ 1064 nm, 500 kHz (6W) 25 µJ @ 1064 nm, 200 kHz (5W) 40 µJ @ 1064 nm, 100 kHz (4W)	At 1064 nm
Repetition rate	50 kHz to 1 MHz	Seed pulse frequency is in the range of 40 MHz to 42 MHz and the integer divisor of this seed clock frequency in the specified repetition rate range is accessible.
Pulse width	10 ps to 15 ps	Assuming a sech2 fit
Mode quality	M2 , 1.3
Beam waist diameter	1 +/- 0.2 mm
Beam waist location	At output port +/- 25% of RR
Astigmatism	± 25% of Rayleigh Range
Ellipticity	0.85 < e < 1.15
Mode parameter change with rep-rate	Mode must remain within the specification, but will change with rep-rate.
Polarisation ratio	> 100:1
Polarisation direction	Vertical ± 3 degrees IR
Contrast ratio	> 100:1	Defined as the energy ratio of the main pulse and first post pulse
Pulse stability (RMS)	< 1% at 1 MHz	Measured over 1000 pulses - 1 sigma
Pulse stability (pk-pk)	< 5%	For 1000 consecutive pulses
Power stability	< 1% over 8 hours	Pk to Pk variation of the rolling average power (average power measured every 30 seconds and averaged over 5 minutes)
Warm up time	Cold start: < 15 minutes Warm start: < 10 minutes
CW leakage	< 5% output power
Long-term pointing stability at fixed rep-rate	< ±25 µrad	Over 8 hours
Pulse control	Process pulse picker as standard to deliver dynamic pulse control
Head weight	62 lbs; 28 kg
PSU dimensions	19-inch rack mounted - 3U
External comms	RS 232; Ethernet	Inputs on the PSU; USB as an option
Power consumption	100V to 240V AC; < 500W	Typical operational

Specification	Value	Comments
Fundamental center wavelength	1064.5 nm +/- 0.5 nm
Output energy	7 µJ @ 1064 nm, 1 MHz (7W) 12 µJ @ 1064 nm, 500 kHz (6W) 25 µJ @ 1064 nm, 200 kHz (5W) 40 µJ @ 1064 nm, 100 kHz (4W)	At 1064 nm
Repetition rate	50 kHz to 1 MHz	Seed pulse frequency is in the range of 40 MHz to 42 MHz and the integer divisor of this seed clock frequency in the specified repetition rate range is accessible.
Pulse width	10 ps to 15 ps	Assuming a sech2 fit
Mode quality	M2 , 1.3
Beam waist diameter	1 +/- 0.2 mm
Beam waist location	At output port +/- 25% of RR
Astigmatism	± 25% of Rayleigh Range
Ellipticity	0.85 < e < 1.15
Mode parameter change with rep-rate	Mode must remain within the specification, but will change with rep-rate.
Polarisation ratio	> 100:1
Polarisation direction	Vertical ± 3 degrees IR
Contrast ratio	> 100:1	Defined as the energy ratio of the main pulse and first post pulse
Pulse stability (RMS)	< 1% at 1 MHz	Measured over 1000 pulses - 1 sigma
Pulse stability (pk-pk)	< 5%	For 1000 consecutive pulses
Power stability	< 1% over 8 hours	Pk to Pk variation of the rolling average power (average power measured every 30 seconds and averaged over 5 minutes)
Warm up time	Cold start: < 15 minutes Warm start: < 10 minutes
CW leakage	< 5% output power
Long-term pointing stability at fixed rep-rate	< ±25 µrad	Over 8 hours
Pulse control	Process pulse picker as standard to deliver dynamic pulse control
Head weight	62 lbs; 28 kg
PSU dimensions	19-inch rack mounted - 3U
External comms	RS 232; Ethernet	Inputs on the PSU; USB as an option
Power consumption	100V to 240V AC; < 500W	Typical operational