Parameter

Specification

Notes

Center Wavelength

1030 ± 5 nm

Average Power

= 10 W

Repetition Rate

100 kHz, 200 kHz

Repetition rate set at factory

Pulse Width

<900 fs

Assuming a sech2 fit

Beam Quality M² (x,y) (4s)

<1.4

Beam Diameter 2w (x,y)

5.0 ± 0.5 mm

At 1m from laser output

Beam Divergence

<1 mrad

Beam Waist Astigmatism

<0.25

At 1m from laser output

Beam Waist Asymmetry

1.00 ± 0.15

Polarisation Ratio

>100:1

At 1m from laser output

Polarisation Direction

Vertical ± 3°

Contrast Ratio

>100:1

At 1m from laser output

Beam Pointing Stability

± 50 µrad/°K

Long-term Pointing Stability (over 8 hours)

<± 50 µrad

At 1m from laser output

Pulse Energy Stability (RMS 1s)

<2%

Measured over 1000 pulses

Pulse Stability (pk- pk)

<6%

100 kHz single pulse

Average Power Stability (RMS 2s) (over 8 hours)

<2%

Warm-up Time (cold start)

<45 min

Warm-up Time (warm start)

<30 min

Pulse Control

Process pulse picker as standard to deliver dynamic pulse control

Output Attenuation

Process pulse picker analog input

Head Weight

49.5 kg

External Comms

Ethernet

Supply Voltage

[100 - 265] VAC

Power Consumption

<1500W

Temperature (non-condensing) - Laser Head

+15 to 30°C (59 to 86°F)

Temperature (non-condensing) - Chiller

+15 to 30°C (59 to 86°F)

Vibration

<0.15 g

Temperature

-10 to +50°C (-14 to 122°F)

Temperature Gradient

15°C (59°F) per hour

Relative Humidity

5% to 90%

Shock

5 g in 30 ms