Heating Bath Circulators(Programmable) JEIOTECH CW3-P

State: In stock

Highly intuitive user interface is insured by equipping the new smart programmable controller.
Model Name: CW3-05P/10P/20P/30P

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Comments

Intelligent program control

● 10 programs available for temperature ramp up and dwell control.
● 10 steps per a program and 99 hours 59 minutes per a step.
● Stored programs are easily linkable.
● Programs can be repeated up to 99 cycles.
● Pre-heating and heating time are settable before program starts.

Performance

● Temperature range from ambient +5℃to 150℃.
● Microprocessor PID control.
● Three point temperature calibration / Automatic tuning / Automatic run.
● Accurate, stable, and efficient temperature management by using a powerful variable-speed pump. (1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation)
● Powerful pump pressure and flow rate throughout the whole temperature range.

Convenience

● Intuitive touch screen LCD controller with easy icons and logical menus.
● Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
● Digital input and output control function for interlocking external devices.
● Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with front access drain valve.
● RS-232 interface for external control and data collection. (RS-232 to USB serial converter is provided.)
● Built-in casters and side handles for easy transport and installation.

Safety

● Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
● Temperature warning indicator simply shows inner reservoir’s temperature by three different colors.
● Complete safety protection system with warning alarms. - Low fluid level and dry-running, over-temperature, over-current.
● Keypad lock function prevents accidental changes during operation.
● Splash-proof keypad.

Model		CW3-05P	CW3-10P	CW3-20P	CW3-30P
Bath volume (L / cu ft)		5 / 0.2	10 / 0.4	20 / 0.7	30 / 1.1
Working temperature range ²⁾ (℃ / ℉)		Amb. +5 to 150 / Amb. +9 to 302
Temperature stability ¹⁾ (±℃ / ℉)		0.05 / 0.09			0.08 / 0.14
Pump	Max. pressure	5.9 PSI (406.8 millibar)
Pump	Max. flow rate	7.4 gallons / minute (28 liters / minute)
Dimension	Bath opening / depth (W×L, D) (mm / inch)	150×99, 160 / 5.9×3.9, 6.3	211×154, 180 / 8.3×6.1, 7.1	290×214, 200 / 11.4×8.4, 7.9	300×264, 230 / 11.8×10.4, 9
	Exterior (W×L×H) (mm / inch)	220×395×424 / 8.7×15.6×16.7	281×450×444 / 11.1×17.7×17.5	360×510×464 / 14.2×20.1×18.3	370×560×494 / 14.6×22×19.4
	Net weight (kg / lbs)	12.5 / 27.6	15 / 33	17.5 / 38.6	19.5 / 43
Electrical requirements (230V, 50/60 Hz)		8.5A	8.5A	8.5A	8.5A
Cat. No.		AAH52741K	AAH52751K	AAH52761K	AAH52771K
Electrical requirements (120V, 60 Hz)		8.6A	8.6A	8.6A	8.6A
Cat. No.		AAH52742U	AAH52752U	AAH52762U	AAH52772U

1) Technical data according to DIN 12876. (bath fluid : water at 50℃)

2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.