Red Star Vietnam Co., Ltd.

Cart 0

Total : đ

Home >> Test & Measurement >> Industrial Production >> Vibration Test Systems >> Vibration Test Systems >> Vibration Controller

K2 Sprint

State: Out of stock

Vibration contorller aiming at cost-effectiveness

While inheriting all of the performance and features of the K2,
K2 Sprint has improved cost-effectiveness with 2-channel hardware.
K2 Sprint is best suited to single monitor channel operation.
[Variations from K2]
●Input 2Chs（No expansion)
●Output 2Chs（No expansion)

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Comments

User-friendly Interface

[Instinctive Operation]

Visualised icons are helpful for operations.

[Simplified definition]

General test definitions are executed by following instructions on the screen using “Simplified definition”.

[Help]

The enhanced Help screen explains meanings of phrases and gives detailed descriptions of the system.

Easy-to-use Functions

[Web monitor]

Web monitor allows the user to monitor excitation on screen using a LAN-based PC.

[Report generator]

Report generator saves test results and data graphs in Microsoft Word in any layout.

Intelligent Control Capabilities

K2 employs high-resolution 24 bit A/D and D/A converters to implement intelligent control capabilities.

Enhanced Interlock Function

A hardware mute function immediately cuts off output signals independent of software control.

[E-mail notification]Notification of any abnormality during excitation or termination of excitation will be sent to any e-mail addresses desired by the user.
[Data saving]The K2 outputs definitions and test results in CSV format.

InstallationK2 is compatible both with OA desks and instrument racks

Basic Software

Specifications

Optional software

SINE

■ Control AlgorithmSwept-sine amplitude is controlled by feedback

■ Control Freq. Range0.1-20000kHz

■ Control Dynamic RangeMore than 114dB

■ Operation ModeSweep/Spot/Manual

■ Estimation MethodAverage, RMS, Tracking

■ Averaging Method of Control ResponseAverage control, Max. control,Min.control

■ Number of Chs.Max.64

*May be affected by other conditions

■ R_DWELL:Resonance Dwell

■ LIMIT CONTROL

■ A_DWELL: Amplitude Dwell

■ Multi Sweep Sine

RANDOM

■ Control AlgorithmPSD of random signal closed loop control by spectrum density for each frequency segment

■ Control Freq.Max.20000kHz

■ Number of Control LinesMax.25600 lines

■ Control Dynamic RangeMore than 94dB

■ Loop Time200ms (fmas=2000Hz, at L=400line)

■ Averaging Method of Control ResponseAverage control, Max. control, Min. control

■ Number of Chs.Max.64

*May be affected by other conditions

■ SOR: Sine on Random

■ ROR: Random on Random

■ PSD LIMIT: PSD limit control

SHOCK

■ Control Algorithm: Finite-length waveform control
■ Control Freq. component: Max.20000kHz
■ Number of Control Lines: Max.25600 lines
■ Control Dynamic Range: More than 84dB
■ Reference Waveform: Classical Shock Waveform
(Half-Sine, Haversine, Saw-tooth, Triangle, Trapezoid),
SINE Beat/SINE Burst, Measured Waveform,Symmetric Compensation Defined Waveform
■ Number of Chs.: Max.64

*May be affected by other conditions

■ LONG WAVEFORM: Waveform reproduction option
(up to 200k data points)

■ MEGAPOINT: Mega data point option
(up to 5000k data points)

■ SRS: Shock Response Spectrum

Console
AC Power	Single-phase AC, 100V-240V (Auto-selected)
External Communication	Contact I/O (for Emergency stop)
Ambient Conditions	0-40℃, below 85% RH, no condensation
Dimensions	W345 x H40 x D210mm (Protruding part not induded)
Mass	2.0Kg (Approx.)
●Input part
Number of Chs.	2
Input Terminal	BNC
Input Signal	Charge, Voltage, IEPE
Charge Amp. Sensitivity	1.0mV/pC or 10mV/pC
Charge Amp. Cut-off	0.32Hz
Max. Input	Charge Input ±10000pC or ±1000pC Voltage Input ±10000mV IEPE Input ±10000mv
Sampling Frequency	Max. 51.2kHz
Coupling	AC or DC
Cut-off Freq. at AC Coupling	0.1Hz
CCLD Amplifier（IEPE)	+24VDC,3.5mA
TEDS（IEPE)	Ver0.9,Ver1.0
A/D Converter	Method : ΔΣmethod Resolution : 24-bit Dynamic Range: 117dB Digital Filter : Ripple in pass band ±0.001dB 　　　　　　 : Rejection band attenuation quantity 110dB
●Output part
Number of chs.	2 (a channel is occupied for drive output)
Output Terminal	BNC
Output Signal	Voltage
Max. Output	±10000mV
Sampling Frequency	Max. 51.2kHz
D/A Converter	Method : ΔΣmethod Resolution : 24-bit Dynamic Range: 120dB Digital Filter : Ripple in pass band ±0.005dB 　　　　　　 : Rejection band attenuation quantity 75dB

■ Required PC specifications

[Model to be used]
・IBM PC/AT (or complete compatible systems)with a PCI Express x 1 expansion slot.
・Faster CPU than Intel Celeron B810 1.6GHz is recommended.
*CPU clock depends on software or options.

[Requirements]
・One expansion slot -PCI Express x1 slot
・Main memory
　WindowsXP(32bit):More than 1GB
　Windows7(32bit):More than 2GB
　Windows7(64bit):More than 4GB
　*The following system requires additional memory.
　When optional software SHOCK/LONG WAVEFORM or MEGA POINT is installed.
・CD-ROM drive is loaded(necessary at installation)
・One USB port (necessary for protect device)
・Microsoft Windows XP Professional SP3 (32bit) or Windosw 7 Professional (32bit/64bit) is loaded.