ICP-MS Integrated Sample Introduction System (ISIS-DS)

State: In stock

For labs that routinely run high numbers of samples, perhaps hundreds of samples a day, the ISIS-DS dramatically increases the productivity of the 7700 Series ICP-MS, while allowing high matrix samples to be run for extended periods. ISIS-DS uses an additional pump and switching valve to enable discrete sampling or loop injection operation. The sample is loaded into the loop then injected to the carrier stream. While that sample is measured, the loop is washed and the next sample is loaded; sample uptake and rinse overheads are virtually eliminated. Coupled with HMI technology of the 7700x and routine operation using single collision cell mode (He mode), the ISIS-DS delivers unmatched productivity for high sample matrix analysis in high-throughput laboratories

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Comments

Technology designed, built and supported by Agilent, combines neatly with the ICP-MS mainframe and features fully integrated software.
The ISIS-DS loop is filled via a peristaltic pump - not a diaphragm vacuum pump so sample consumption is low (around 2 mL/min) and there is no vacuum pump and associated pump valve to wear and replace.
Complete compatibility with the industry standard Cetac ASX-520 autosampler which is also fully supported by Agilent.
ISIS-DS can significantly improve sample throughput giving total run times of less than 1.5 min (depending on element list and sample type) which is 2-3 times faster than normal (continuous) sample introduction.
Reduced exposure of the interface to sample matrix gives reduced signal drift and improved short- and long-term precision as well as less frequent cone cleaning.
ISIS-DS can also be combined with Agilent s High Matrix Introduction Accessory technology for rapid analysis of samples containing % levels of Total Dissolved Solids. This provides better DLs and freedom from interferences compared to ICP-OES, all with discrete sampling productivity.

To place an order or get more detailed ordering information including prices and availability, contact your local Agilent sales office or distributor (in the U.S. and Canada, call 1-800-227-9770; Option 2,1) or Request a Quote.

Product Description	Product Number
Integrated Sample Introduction System (ISIS) for 7700 Series ICP-MS	G4911A
ISIS with 2 pumps, no valves (also includes preconfigured ISIS tubing kit for auto dilution, G4911-68201)	Option 001
ISIS with 1 pumps, 1 valve (also includes preconfigured ISIS tubing kit for discrete sampling, G4911-68202)	Option 002
ISIS with 2 pumps, 1 valve (also includes preconfigured ISIS tubing kits for auto dilution and discrete sampling, G4911-68201 and G4911-68202)	Option 003

Spares And Preconfigured Tubing Kits For ISIS
ISIS Spares Kit	G4911A Option 010
Preconfigured ISIS Tubing kit for Auto-Dilution (included with G4911A Options 001 and 003)	G4911-68201
Preconfigured ISIS Tubing kit for Discrete Sampling (ISIS-DS) (included with G4911A Options 002 and 003)	G4911-68202
Hydride Generation Accessory	G4911A Option 200 or G3138-65005

Product Description	Product Number
Integrated Sample Introduction System (ISIS) for 7500 Series ICP-MS	G3148B
Pump unit (2 pumps) only	Option 011
Pump Unit (2 pumps) with one Switching Valve	Option 012
Pump Unit (2 pumps) with two Switching Valves	Option 013
Hydride Generation	Option 200