FMDU. Flow Meters Demonstration Unit

State: Out of stock

A self-contained unit to demonstrate the characteristics of flow meters used in measurement of water flow through pipes or open channels

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

PRACTICAL POSSIBILITIES

1.- To demonstrate the important characteristics of fourteen types of flow meters

used in the measurement of water flow through pipes or open channels.
2.- Comparing the use, application and limitations of different types of flowmeters.
3.- To study the application of Bernoulli’s Theorem.
4.- Understanding the principles on which various types of flow meters are based.
5.- Implications of performance, convenience, accuracy, head loss, etc.

on flow meters selection.
6.- Effect of the air in the hydraulic stream on flow meter performance.
7.- To use manometers to measure pressure drop.

8.- Relating pressure drop across a flow meter to flow rate.

9.- Measure error determination using the venturimeter.
10.- Factor C determination in the d venturi.
11.- Strangulation determination in the venturi.
12.- Measure error determination using the orifice plate.

13.- Factor C_d determination in the orifice plate.
14.- Effective area determination in the orifice plate.
15.- Measure error determination using the Pitot tube.
16.- Factor C_d determination in the Pitot tube.
17.- Measure error using the swinging flap meter.
18.- Measure error using the rotary piston meter.
19.-Measure error using the shunt gapmeter.
20.-Energy loss comparison in the different meters.
21.- Measure error using the helical rotary type flowmeter.
22.- Measure error using the inferential multistream type flowmeter.
23.- Broad crested weir.
24.- Crump weir.
25.- “H” flume.
26.- Washington flume.

Anodized aluminium structure and panel in painted steel.
Diagram in the panel with similar distribution to the elements in the real unit.
Pipe circuit, including:
- Flow regulation valve.
- Several pressure measurement tappings.
- Air entrainment device.
- Flexible pipe to connect to the Hydraulics Bench.
- Additional pipes to change the pipe circuit configuration.
Water manometer of 1 m. length and 2 Bourdon type manometers from 0 to 2.5 bar, precision 1%., to measure the pressure drop.

Meters included:
FMDU-1. Orifice plate.
FMDU-2. Venturi.
FMDU-3. Shunt gapmeter.
FMDU-4. Pitot.
FMDU-5. Volumetric rotary piston.
FMDU-6. Swinging flap.
FMDU-7. Helical rotary.
FMDU-8. Electro-magnetic.
FMDU-9. Current velocity meter.
FMDU-10. Inferential multistream:
FMDU-11. Broad crested weir.
FMDU-12. Crump weir.
FMDU-13. ”H” flume.
FMDU-14. Washington flume.
FMDU-15. Channel for FMDU-10, FMDU-11, FMDU-12, FMDU-13 and FMDU-14.

FMDU-16. Digital manometer
FMDU-17. Hook and point gauge.

Auxiliary supply box (for FMDU-7, FMDU-5 and FMDU-8).
Quick and easy removal of pipes with test flow meters for evaluation and inspection.
Meters can be used independently to support research or student project work.
Reference flow meter permanently fitted: a turbine flow meter or an electro-magnetic meter.

Hydraulics Bench:
Mobile hydraulic bench, made in polyester reinforced with fibreglass, and mounted on wheels for mobility.
Centrifugal pump, 0.55 KW, 2.5 Bar, 150 l/min., single phase 220V./ 50Hz or110V./ 60Hz.
Sump tank capacity: 165 litres.
Small channel: 8 litres.
Flow measurement: volumetric tank, gauged from 0 to 7 litres for low flow values and from 0 to 40 litres for high flow values.

Manuals: This unit is supplied with 8 manuals.
Dimensions (approx.): 3200 x 1300 x 1500 mm.
Weight (approx.): 300 Kg.

Catalogue_&_datasheet_EN