Time Division Multiplex (TDM). PAM Transmitter and Receiver - EDICOM2

State: Out of stock

This module consists of a board for studying Pulse Amplitude
Modulation and Demodulation (PAM), and Time Division Multiplex
(TDM).

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

Practical possibilities:

1.- Analysis of the principles of Time Division Multiplex (TDM).
2.- Analysis of the features of the Transmitter, the Receiver and all the other circuits.
3.- Comparison between different operation modes, varying with their connections.
4.- Faults simulation

This module consists of a board for studying Pulse Amplitude Modulation and Demodulation (PAM), and Time Division Multiplex (TDM).

Sampling and time division multiplex are analyzed for each channel.

It includes analog tetrapolar switches installed both in the transmitter and the receiver for channel multiplexing and demultiplexing.

Input channels: 4 TDM and PAM.

Analog channels: 250 Hz., 500 Hz, 1 KHz, and 2 KHz.

Sampling frequency: 16 KHz per channel.

Sampling utilization factor: variable with transmission from 0 to 90% using 10% steps per channel.

Analog channels: 250 Hz., 500 Hz, 1 KHz, and 2 KHz, variable amplitude with potentiometer.

Low-pass filter cutoff frequency: 3.4 KHz.

Three operation modes, allowing verification of the receiver's complexity and channel usage, depending on the transmitted information.

Possibility of transmitting externally supplied signals.

The board permits introducing faults simulation using a switchboard, thus enabling the student to study in depth the board's operation and localization of faults.

Catalogue_&_datasheet_EN
Tender_Specifications_EN