The fluidity of this transparent mounting resin and its very low shrinkage ensure a maximum penetration ratio in cavities. It is ideal for microelectronics, optics and microsystem applications. Compatible for conventional scanning electron microscopy (SEM) examinations.

Mono-component resin easy to dose and manipulate (no loss). Polymerisation with low temperature rise in 20 minutes in the blue light device M.M.866 + 10 minutes for the surface varnish. With no disturbing odour, it is resistant to alcohol and acids.

The Resin 603 is a two-component epoxy resin without CMR substance used to achieve high quality technical metallographic mountings at room temperature. This resin is the best choice when the transparency of the coating is a requirement.

The resin has zero shrinkage, excellent adhesion to all kinds of materials and a very good chemical resistance.

With an ideally adjusted viscosity, the resin 603 is used to mount metallographic specimens with complex shapes, porosities, or delicate technical coatings.

Solvent free and CMR-free (no Carcinogenic, Mutagenic, toxic to Reproduction susptences).

The Resin 603.2 is a fast-curing two-component epoxy resin without CMR substance used to make technical metallographic mountings. It must be used on materials that withstand temperatures of 140°C.

This transparent resin has zero shrinkage, excellent adhesion to all kinds of materials and very good chemical resistance.
Solvent free and CMR-free (no Carcinogenic, Mutagenic, toxic to Reproduction susptences).

Polymerisation 2h.

Versatile, it is adapted to the majority of common materials for the fast mounting standard sample. It is possible to change the viscosity by modifying the proportion of the mixture: liquid + powder. Resistant to the principal acids used in laboratories.

* Packaging related to transport restrictions

A perfectly transparent resin used for precision parts, notably those of the electrical or 
electronics industry. It renders the sample perfectly visible, which allows analysing precise points. It must be used with the pneumatic device M.M.806 to obtain an optimum transparency.

* Packaging related to transport restrictions

The methyl-methacrylate resin 609 is available in the Plastichrome version – 5 transparent colours to simplify the classification of samples.

The Resin 607 is a three-component resin based on modified polyester.
This fast curing resin adheres perfectly to metal surfaces and its mechanical characteristics make it particularly effective on very hard materials.
Its very low shrinkage allows edge examinations on metallographic samples.
It is resistant to the main acids and bases used in laboratories.

The Bi-component resin 608 based on low viscosity modified polyester is ideal for the mounting of metallographic samples of complex shapes.

With a very low shrinkage and a high hardness, this resin is suitable for the mounting of hard and very hard samples.
It is resistant to the main acids and bases used in laboratories.