This probe is a special development for leak detection at subterranean tanks or lines and used along with the XRS 9012. In order to prevent the immediate dissipation of the hydrogen upon reaching the surface due to its high volatility, the probe absorbs the gas directly from the ground or flooring. Hence it is possible to precisely locate even the smallest of leaks in tubes or containers without the need to lay these bare by means of drilling or excavating.
Part of the equipment of the soil probe XRS 8612 is a vacuum pump with two operating speeds. The used hydrogen sensor is identical in construction to the sensor of the XRS 9012. The integration of this sensor results in the fact that the traced gas is reported faster than would be possible with the gas fed to the leak detector via a hose.
The reliable battery of the XRS 9012 is also used for the soil probe XRS 8612. A light-emitting diode indicates, when the battery needs to be charged. The battery can be charged indefinitely often and without time limit.
In order to prevent, that water is sucked into the probe, the soil probe XRS 8612 is provided with dust filter and overflow valve. An LED indicates, when the overflow valve is closed. Simply via the push of a button the valve can be set back to operating state.
Master data |
|
Article number |
XRS008612 |
H2 gas [ppm] |
|
Min. measuring range |
0,7 |
Max. measuring range |
— |
Response sensitivity |
0,7 |
Resolution |
— |
Response time [s] |
<1 |
Pump kit |
|
Pump capacity standard [l/min] |
0,5 |
Power supply |
Battery |
Power input [kW] |
— |
Battery capacity standard ([h] > 0°C) |
20 |
Battery capacity at maximum pump performance ([h] > 0°C) |
3 |
Dimensions of sensor element |
|
Length [mm] |
905 |
Diameter Ø [mm] |
24 |
Material of sensor element |
|
Stainless steel |
— |
Other |
√ |
Material of handle |
|
Plastic |
— |
Interfaces/plug design |
|
SDI connector |
— |
Special 5-pin plug |
√ |
Surrounding conditions (measuring electronics integrated in handle) |
|
Operating temperature min. [°C] |
-20 |
Operating temperature max. [°C] |
50 |
Weight (packing excluded) |
|
Weight [kg] |
1,80 |
STANDARD SCOPE OF DELIVERY |
||
Hand sensor |
||
|
Option |
— |
Hand sensor with integrated connection cable |
||
|
Option |
— |
Ground sensor with active suction pump and integrated connection cable |
||
|
Option |
√ |
ASCERTAINABLE MEASURED VALUES AND FUNCTIONS |
|
Internal sensors |
|
H2 hydrogen gas [digits] |
√ |
Functions and equipment |
|
Flexible gooseneck |
— |
Integrated connection cable |
— |
Screw-on hollow extension rods |
— |
Functional knob with connected active suction pump |
√ |
Rubber cuff for better sealing |
√ |
Shielded sensor tip for penetration of soft ground |
— |
Robust sinter filter for sensor protection |
√ |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.