1.- Installation, connection and familiarization with the software.
2.- Study of the transfer function (static and dynamic).
3.- Familiarize with the Set point generator, generation of a square signal using two analog signals.
4.- Familiarization with the navigation of an industrial controller (operator
page screen, trend display screen, etc).
5.- Setting alarms and diagnostics generation.
6.- Familiarization with the field bus stations.
7.- Familiarization with the device master file “DMF”.
8.- Operation and function of a digital industrial controller.
9.- Layout of a field bus system using the Profibus DP field bus.
10.- Defining the bus technology with the stations.
11.- Communication protocols

12.- Function of an Analog Profibus DP Inputs/outputs module.
13.- Function of a Digital Profibus DP Inputs/outputs module.
14.- Study of OPC (OLE for Process Control) server function.
15.- Access to the OPC database from the control configuration software
(trainer software).
16.- Setting and configuration of tags.
17.- Setting of an industrial controller using the front panel (configuration
level, parameter level, operation control level, etc.).
18.- Remote setting of an industrial controllerusing the control
configuration software (configuration level, parameter level, operation
control level, etc.).
19.- Reading control variables and PID parameters and displaying them on
computer (PC) monitor.
20.- Reading inputs and outputs data, and displaying of analog and digital
process variables on computer (PC) monitor.

Industrial controller module:

Industrial controller module:

ABB Controller CM30. Display: color 1/4 VGA TFT, liquid crystal display (LCD) with built-in backlight.
Operator keypad: 6 tactile membrane keys.
Control parameters:
- Proportional band: 0 to 999.9 %.
- Integral: 0 to 10000 s.
- Derivative: 0 to 999.9 s.
- Manual Reset 0.0 to 100 %.
Autotune: On-demand calculation of control settings.
Process alarms: Number: 8.

Analog inputs:
  Number: 2. Complete configurable process input.
  Selectable set points via software (remote from the computer) or front panel.
Analog/Digital output:
  Number: 1.
  Type: configurable as analog or digital pulse.
Relays:
  Number: 2.
  Contact rating: 5A, 240V.
Communication (PC): RS-485 connector (Profibus DP).

Set Point Generator module:
  2 Voltages selectable through a switch, which allows generate a step signal.
  Amplitude: 0 to 10Vdc.

Analog Profibus DP Inputs module:
  4 analog input connectors.
  RS-485 connector (Profibus DP).

Analog Profibus DP Outputs module:
  4 analog output connectors.
  RS-485 connector (Profibus DP).

Digital Profibus DP Inputs/Outputs module:
  4 digital inputs simulated by four switches.
  4 digital outputs leds indicators.

Digital voltmeter: Range: 0 to 10Vdc.
All process variables are accessible as analog signals at lab jacks.
Possibility of connection of external instruments via lab jacks (for example: line recorder, oscilloscope, etc).

Interface card, with RS-485 connector, to connect the industrial controller through a field bus (Profibus DP) with the computer (PC).