PRACTICAL POSSIBILITIES
1.- Density and specific gravity measurements. |
12.- Hysteresis curve determination.
|
Process diagram in the front panel. |
Tank where water is stored, in the lower part of the bench. |
Methacrylate tank at the upper part of the bench. |
Plastic deposit. |
Thermometer. |
4 Ubbelhode capillary viscosimeters of 0.6-3 cp, 2-10 cp, 10-50 cp and 60-300 cp. |
3 Graduated cylinders. |
Set of glass elements. Elements set for demonstration of free surface in static conditions (3 elements). |
Bourdon manometers calibration. Manometer range: 0-2.5 bar. |
Manometers (range: 0-500mm). |
Module to determine the Metacentric Height (FME11): - Maximum angle: +/-13. - Dimension of the float: L=353mm, W=204mm, total H=475mm. |
Module for studying the Hydrostatic Pressure (FME08): |
Dead Weight Calibrator Module (FME10): |
Fluid Level Meter (hook and point gauge) and Flow over Weirs (FME02): Dimension of rectangular notch: 30 x 82 mm. |
Module for studying Archimedes principle (lever balance with displacement vessel, bucket and cylinder) |
Set of weights (5, 10, 50, 100, 400, 1000, 2000, 5000 gr.) |
One air pump and 2 water pumps. |
Universal hydrometer (0-70 Baumé , 0.700 - 2.000 Sp/gr). |
Stop clock. |
Two 600 ml beakers. |
Spare parts for the viscosimeter elements. |
Valves. |
Manuals: This unit is supplied with 8 manuals. |
Dimensions (approx.): 1500 x 800 x 1900 mm. Weight: 200 Kg. |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.