• Tần số siêu âm 37 kHz
• Bể rửa được chế tạo bằng thép không gỉ chịu ăn mòn
• Bảng điều khiển chống nước, thân thiện và dễ sử dụng
• Đèn LED hiển thị các chức năng cài đặt
• Nút xoay để đặt thời gian
• Có chế độ vận hành liên tục hoặc đặt thời gian từ 1 đến 30 phút
• Tính năng Sweep tối ưu hóa phân bố trường sóng âm bên trong bể nhờ điều biến tần số
Ultrasonic Frequency (kHz) | 37 |
Power Consumption Total (W) | 30 |
Mains Voltage (Vac) | 100/115/230 |
Unit Outer Dimensions W/D/H (mm) | 206/116/178 |
Tank Internal Dimensions W/D/H (mm) | 190/85/60 |
Basket Internal Dimensions W/D/H (mm) | 178/80/47 |
Tank Capacity (l) | 0,8 |
Weight (kg) | 2,0 |
Each Elmasonic ultrasonic cleaning device has matching covers made of different materials (plastic, transparent plastic or stainless steel).
Plastic covers not only protect against evaporation, but serve also as noise control barriers and drip trays for wet baskets. Stainless-steel
insert covers can accommodate 1-2 glass beakers.
Parts and components for cleaning should rest directly on the tank floor, as they could damage the tank or scratch the parts and components
through vibrations caused by the ultrasound.
And the cavitation fields, which are the areas in which the ultrasonic cleaning action takes effect, are not positioned at the bottom of the tank,
but a few centimetres above. This is why Elma offers matching immersion and insert baskets made from either plastic or stainless steel for
the various Elmasonic devices.
Hostalen tubs are used to gently clean sensitive gemstones or highly-polished precious metals.
Special acid-resistant tubs made of PP plastic are particularly well suited for parts cleaning and surface processing using aggressive
liquids such as acids. The acid-resistant insert tub is submerged in a water-filled ultrasonic bath and sonicated through the contact liquid (water).
As the acid will not damage the ultrasonic oscillation tank, the device has a long service life.
In order to use cleaning agents efficiently and avoid wasting large quantities where detergents are replaced frequently, special jars or
beakers are frequently used for smaller parts.
Depending on its frequency, ultrasound generates different noise levels within the liquid. We have therefore developed noise protection
boxes for a number of device sizes, which significantly reduce the noise level if the cleaning device is too noisy at its site, for example,
in a doctor's practice or in the lab.
After parts have been cleaned in an ultrasonic bath and rinsed in deionized water, they can be dried quickly using the hot-air dryer.
This completes the professional cleaning process.
We offer holders and bins for jewellery and laboratory applications that are specifically designed for these applications. Our range includes
highly flexible jewellery holders with 10 adjustable hooks for jewellers and design studios.
For lab use, there are device holders, test tube holders, clamps for Erlenmeyer flasks and dental tray holders for full- and half-size DIN trays.
Ultrasound will warm up the ultrasonic bath during prolonged operation, and cooling coils are used to maintain a preset temperature.
To increase the cooling effect for larger devices, the coils can be connected in series.
Ultrasonic cleaning devices such as the Elmasonic S 500 would be too tall for table-top operations. To achieve a comfortable height,
we offer an optional frame for the Elmasonic S 500.
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.