* Above blue color sector is unstable range after 24 hours operation.
● Automatic shut off after overheat alarm.
● Low and empty water level alarm.
● Power supply leakage breaker.
● Over current protection.
● Overheat protection.
● Door open alarm.
● Three different volume sizes are available to suit any users’ needs.
● Advanced performance of low temperature and humidity control is achieved by adapting the humidification tank interior to the chamber.
● Corrosion resistance stainless steel chamber and electric polished humidification tank.
● Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
● Maintenance of water supply are easily performed with a front water tank.
- Water level check indicated by water level bar in the tank.
- Portable water container makes supplying water convenient.
● Water supply during operation is also available for long term test purposes.
● Direct water system provides user great convenience when performing long-term tests. (optional)
● Clear observation of samples.
- Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
- Wider view, inner glass door is available for monitoring of samples. (optional)
● Exhaust duct is located at the upper right side of the unit to avoid influence other devices.
● Detachable condenser air-filter for easy maintenance of refrigerating efficiency.
- Maintenance of air filter no longer cumbersome with our detachable condenser air filter.
● Cable port for external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
● Casters for easy mobility during installation or relocation.
● Microprocess PID control / Auto-tuning / Calibration.
● 5.7 inch colorful interactive touch type LCD controller.
● Set value and present value are clearly visible together on display.
● Operating progression visible in graph mode allow for direct data interpretation.
● Tri-lingual language support. (English / Chinese / Korean)
● Temperature and other operating parameters recorded with use of an optional recorder. (optional)
● Sufficient programmable control support.
|
Description |
TH-I |
|
Programmable Pattern Capacity |
120 |
|
Pattern Repeat Time |
999 |
|
Max. Segments per a Pattern |
100 |
|
Available Max. Segments* |
1200 |
|
Programmable Process Time per a Segment |
0 to 99 hr 59 min |
* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000,
so you need to arrange the number of segment an patterns properly.
● Computer interface
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings / recovery, and temperature values.
- RS-232C port as standard offer.
|
Model |
TH-I-180 |
TH-I-300 |
TH-I-408 |
|
|
Chamber Volume (L / cu ft) |
180 / 6.4 |
300 / 10.6 |
408 / 14.4 |
|
|
Control System |
BDBC2 system - Balanced Dehumidifying & Bath Cooling control |
|||
|
Controller |
Programmable, Touch screen type controller (5.7" Color monitor) |
|||
|
Temperature |
Range (℃ / oF) |
-35 to 150 / -31 to 302 without humidity* best programmable control range : -30 to 140 / -22 to 284 |
||
|
Fluctuation1) |
0.1 / 0.18 |
0.2 / 0.36 |
0.2 / 0.36 |
|
|
Variation1) |
0.6 / 1.08 |
0.5 / 0.9 |
0.5 / 0.9 |
|
|
Time |
Heating |
50 From -35℃ to 120℃ (-31oF to 248oF) |
||
|
Cooling |
60 From 20℃ to -35℃ (68oF to -31oF) on singe point control * |
|||
|
Humidity |
Range (%RH) |
Full Range: 20 to 98 |
||
|
40 to 70 at 10℃ (50oF) |
||||
|
Fluctuation 1) |
0.3 |
0.4 |
0.3 |
|
|
Variation 1) |
3 |
3 |
3 |
|
|
Refrigeration |
System |
Mechanical single stage refrigerator system(air-cooled condenser) |
||
|
Refrigerant |
R-404A |
|||
|
Cooler |
Plate fin cooler |
|||
|
Heater |
Material |
Ni-Cr Wire Heater / SUS sheath Heater |
||
|
Sensor |
Temperature |
Pt 100 |
||
|
Humidity |
Electronic sensor - Free of drying a wet pack and good reaction time |
|||
|
Material |
Interior |
Stainless steel #304 |
||
|
Exterior |
Stainless steel #304, Steel with powder coating |
|||
|
Insulation |
Polyurethane foam 100mm (3.94") |
|||
|
Door |
Glass wool |
|||
|
Air Flow |
Tangent blower (90W) |
|||
|
Water Supply |
Capacity |
15L (0.53cu ft) - Cartridge type |
||
|
Water Quality |
pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below |
|||
|
Quantity of Wire Shelves (included / max.) |
2 / 9 |
2 / 10 |
2 / 10 |
|
|
Distance of between Shelves (mm / inch) |
60 /2.4 |
|||
|
Dimension |
Interior |
500×630×600 / 19.7×24.8×23.6 |
600×630×800 / 23.6×24.8×31.5 |
600×850×800 / 23.6×33.5×31.5 |
|
Exterior (mm / inch) |
1025×1035×1530 / 40.4×40.7×60.2 |
1120×1070×1730 / 44.1×42.1×68.1 |
1120×1240×1730 / 44.1×44.8×68.1 |
|
|
Viewing Windows (mm / inch) |
200×330 / 7.9×13 |
|||
|
Net Weight (kg / lbs) |
310±10 / 683.4±22 |
375±10 / 826.7±22 |
400±10 / 881.8±22 |
|
|
Cable Port |
Basically one hole provided / Ø50mm (2")Optionally max. two holes available / Ø50 or 80mm (2 or 3.2") |
|||
|
Interface Port |
Basically RS-232C [RS-485(Maximum 9 Units Control)-optional] |
|||
|
Electrical Requirements (230V, 60Hz) |
1ph / 23A |
|||
|
Cat. No. |
AAH80111K |
AAH80121K |
AAH80131K |
|
|
Electrical Requirements (230V, 50Hz) |
1ph / 23A |
|||
|
Cat. No. |
AAH80112K |
AAH80122K |
AAH80132K |
|
|
Electrical Requirements (380V, 50Hz) |
3ph / 7.7A |
|||
|
Cat. No. |
AAH80118K |
AAH80128K |
AAH80138K
|
|
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
