Intelligent program control.

● 10 programs available for temperature ramp up and dwell control.
● 10 steps per a program and 99 hours 59 minutes per a step.
● Stored programs are easily linkable.
● Programs can be repeated up to 99 cycles.
● Pre-heating and heating time are settable before program starts.
● Microprocessor PID control / automatic tuning / auto run.

Operating Features

● +5℃ above room temperature to 150℃.
● Three point temperature calibration.
● Digital timer for delayed ON / OFF. (from 1 min to 99 hr 59 min)
● Protection against over-temperature and low fluid level.
● Digital input and output control function for interlocking external devices.
● Colorful LCD display with interactive input system.
● Keypad lock function prevents accidental changes during operation.
● Splash-proof keypad.
● RS-232 interface.(RS-232 to USB serial converter is provided.)

Constructional Features

● Accurate, stable, and efficient temperature management by using a powerful variable-speed pump. (1 to 3 steps of the pump for internal circulation and 4 and 5 steps for external circulation)
● Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
● Protection against low fluid level and dry running by auto-matic shut down of the heater together with audible and visual alarms.
● Corrosion-resistant, seamless, leak-proof, round-cornered, and easy-to-clean stainless steel reservoir with a drain valve.
● Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the whole temperature range.
● Quick-release front grille for easy cleaning of the condenser.
● Compact footprints ideal for cramped lab space.

 

* Applicable for CW-P Models 
* Bath fluid: water (at the normal Temperature)