● Easy to use hand held 4 gas analyser.
● Declaration of conformity to OIML R99 Class 1.
● Certificate of calibration supplied.
● Ideal for emissions diagnostics, tuning and regulated testing. Measures CO, HC, O2, CO2, and Lambda (or AFR).
● Easily upgradeable to NOx or can be ordered as 5 gas analyser AUTO5-1.
● Fast warm up time and fast response time with higher output pump.
● 5 language options built in
● Store up to 250 Tests
● RPM and oil temperature measurements plus accessories.
● Prints via optional Infra-red printer.
● PC compatible via RS232 for uploading stored data to PC for spreadsheet or graphical analysis and printing.
| Carbon Monoxide | 0.01% | ±5% of reading*1 ±0.06% volume*1 |
0-10% Over-range 20% |
| Oxygen 02 (Fuel Cell) | 0.01% | ±5% of reading *1 ±0.1% volume*1 |
0-25% Over-range 48% |
| Hydrocarbon (HC-hexane) (NDIR) | 1ppm | ±5% of reading*1 ±12ppm volume*1 |
0-3000ppm Over-range: 10,000ppm |
| Carbon Dioxide (Infrared) | 1ppm | ±5% of reading*1 ±0.5% volume*1 |
0-16% Over-range: 25% |
| Nitric Oxide*2 (fuel cell) | 1ppm | 0-4000ppm ±4% or 25ppm; 4000 - 5000ppm ±5% |
0-5000ppm |
| Oil Temperature | 0.1°C/F | ±2.0°C±0.3% of reading ±3.6°F±0.3% of reading |
0-150°C 32-302°F |
| RMP | 1 rpm | 50 rpm | 200-6,000 rpm. |
| Carbon Monoxide Corrected CO | 0.01% | Calculated | 0-15% |
| Lambda AFR (Petrol) (LPG) |
0.001 00.01 |
0.8 - 1.2 11.76 - 17.64 12.48 - 18.72 |
*1 Using dry gases at STP
*2 Standard on models Auto 5-2 and 5-1 only
To obtain the quoted specificaton an instrument should be calibrated with clean ambient air (normally outside the workshop) at standard temperature and pressure (STP).
**Note:** The analyser is not for use with a Dynometer, unless the high temperature probe is fitted.
| Sensor response T95 | 15 seconds for Auto 4-1, 5-1 Nominal 20 seconds Auto 4-2, 5-2, 4-3 & 5-3 |
| Warm Up | Less than 3 minutes |
| Pre-programmed Fuels | Petrol, LPG and CNG |
| Data-Logging | 255 Snap Shots |
| Dimensions Weight Handset Probe |
1kg 220mm x 55mm 120mm Insertion depth 350mm x Diameter 15mm Clip handle to secure to exhaust, 4m long home Various probes available including high temperature |
| Ambient Operating Range | +5°C to +40°C/10% to 90% RH non condensing |
| Storage temperature | Minimum: 0°C Maximum: +50°C |
| Battery Charger | Input: 110Vac/230 Vac nominal Output: 10Vac off load |
| Analyser battery run time | >4hours from full charge with the pump running |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
