Aluminum Gate Valves Series 1

State: In stock

Agilent is pleased to offer Series 12 Aluminum Gate Valves in partnership with VAT. Series 12 valves are clean, economical, and smoothly actuated.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

Agilent is pleased to offer Series 12 Aluminum Gate Valves in partnership with VAT. The Series 12 valves provide a low-cost, low-particle, low profile means of isolating a high vacuum pump, and are a less expensive alternative to stainless steel valves. Series 12 valves are clean, economical, and smoothly actuated. The aluminum gate valve has a small flange face-to-face profile that makes it easy to install and maintain. The valves are available in manual, push-rod operation and double acting pneumatic operation. The pneumatic valves are available with solenoid (pilot) valves at 115 VAC, 220 VAC and 24 VDC, and a position indicator.

Features

Offered in ISO-63, 100, 160, 200 and 250 versions
Pressure Range: 7.5 X 10-8 Torr- 23 psi/1 X 10-7 Millibar- 1.6 Bar (abs)
Available in hand operated and air operated versions
Polymeric seal for lower cost in multiple applications
Split body for easy cleaning and shorter maintenance cycles
VATLOCK sealing configuration provides fast, positive sealing and low vibration operation
Position indicators and air control solenoid valves for 115VAC, 240VAC and 24VDC service are optional

Specifications

Leak rate: valve body, valve seat		< 1 · 10-9 mbar Is-1
Pressure range
ISO 63 – 160		1 · 10-7 mbar to 1.6 bar (abs)
ISO 250		1 · 10-7 mbar to 1.2 bar (abs)
Differential pressure on the gate
ISO 63 – 160		≤ 1.6 bar
ISO 250		≤ 1.2 bar
Differential pressure at opening		≤ 30 mbar
Cycles until first service
ISO 63 – 160		200 000
ISO 250		100 000
Temperature 1)
Valve body		≤ 120 °C
Manual and pneumatic actuator		≤ 80 °C
Solenoid valve		≤ 50 °C
Position indicator		≤ 80 °C
Heating and cooling rate		≤ 30 °C h-1
Material
Valve body	ISO 63 – 160	EN AW-5083 (3.3547), -6061 (3.3211)
	ISO 250	EN AC-42100 (3.2371)
Mechanism	ISO 63 – 160	AISI 304 (1.4301)
	ISO 250	EN AW-6082 (3.2315)
Seal: bonnet, gate		FKM (Viton)
Feedthrough		shaft feedthrough
Mounting orientation		any
Solenoid valve		24 V DC, 115 V, 220 V, 5.4 W
Position indicator: contact rating
Voltage	≤ 250 V AC	≤ 50 V DC
Current	≤ 2 A	≤ 1.2 A
Valve position indication		visual (mechanical)
1) Maximum values: depending on operating conditions and sealing materials