Temp. & Humid. Chambers (Tabletop-KE Models) JEIO TECH TH-KE-100

State: Out of stock

Various environmental tests can be performed due to wide temperature and humidity control range.

Warranty: 12 months

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Accessories
Comments

Temperature & Humidity Control Range

Safety Features

● Built in door lock.
● Automatic shut off after overheat alarm.
● Low and empty water level alarm.
● Power supply leakage breaker.
● Over current protection.
● Overheat protection.
● Door open alarm.

Operating Features

● Microprocess PID control / Auto-tuning / Calibration.
● User friendly LCD controller.
- Set value and present value are clearly visible together on display.
- Operating progression visible in graph mode allow for direct data interpretation.
- Temperature and other operating parameters recorded with use of an optional recorder. (optional)
● Sufficient programmable control support.

Description	TH-KE
Programmable Pattern Capacity	10
Pattern Repeat Time	999
Max. Segments per a Pattern	100
Available Max. Segments*	100
Programmable Process Time per a Segment	0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000,
so you need to arrange the number of segment an patterns properly.

● Computer interface
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings / recovery, and temperature values.
- RS-232C port as standard offer.

Constructional Features

● Compact design and quite operation.
● Uniform temperature and humidity control guarantees reliable test result.
● Three different size models are available to suit user’s need.
● Corrosion resistance stainless steel chamber and electric polished humidification tank.
● Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
● Maintenance of water supply are easily performed with a front water tank.
- W ater level check indicated by water level bar in the tank.
● Water supply during operation is also available for long term test purposes.
● Direct water system provides user great convenience when performing long-term tests. (optional)
● Clear observation of samples.
- Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
● Cable port for external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
● Two type of stands for space-saving.(optional)
- Single stand with a drawer provides enough storage space.
- Two step stand accepts loading two units to save limited space.

Model		TH-KE-025	TH-KE-065	TH-KE-100
Chamber Volume (L / cu ft)		25 / 0.9	65 / 2.3	100 / 3.53
Controller		Program controller (LCD type)
Temperature ¹⁾	Range (℃ / ℉)	-35 to 150 / -31 to 302 without humidity +15 to 90 / 59 to 194 with humidity
	Fluctuation²⁾ (±℃ / ℉) at 50℃ / 60%RH	0.4 / 0.72		0.3 / 0.54
	Variation²⁾ (±℃ / ℉) at 50℃ / 60%RH	0.3 / 0.54	0.4 / 0.72
Time	Heating³⁾ -without Humidity (Min.)	60 (-35℃ to 100℃)
	Cooling³⁾ - without Humidity (Min.)	70 (20℃ to -35℃)
Humidity	Range (%RH)	FULL RANGE : 20 to 95 45 to 65 at 15℃ (59℉) 40 to 95 at 20℃ (68℉) 20 to 95 at 40 to 85℃ (104 to 176℉) 20 to 90 at 90℃ (194℉)
	Fluctuation²⁾(±%RH) at 60%RH / 50℃	4.1	2.8	1.8
	Variation²⁾ (±%RH) at 60%RH / 50℃	0.9	1.0	1.2
Refrigeration	System	Mechanical single stage refrigerator system (air-cooled condenser)
	Refrigerant	R-507A
Cooler		Plate fin cooler (cooper)
Heater	Material	SUS sheath Heater
Sensor	Temperature	Pt 100
	Humidity	Electronic sensor - Free of drying a wet pack and good reaction time
Air Flow (sirocco fan)		2 sets of sirocco fan
Material	Internal	Stainless steel #304
	External	Stainless steel #304, Steel with powder coating
	Insulation	Polyurethane foam 100mm [3.94"]
	Door	Glasswool
Water Tank	Capacity (L / cu ft)	8 / 0.28	11 / 0.39	15 / 0.53
	Quality	pH6.2 ~ 7.2, Electrical conductivity 20℃ / cm to below
Interface Port		Basically RS-232C, [RS-485: optional]
Cable Port		Basically one hole provided / Ø 50mm (2") Optionally max. two holes available/ Ø 50 or 80mm (2 or 3.2")
Quantity of Wire Shelves (included / max.)		2 / 7	2 / 10
Distance of between Shelves (mm / inch)		20 / 0.8
Dimension (W×D×H)	Internal (mm / inch)	350×220×350 / 13.8×8.7×13.8	400×330×495 / 15.7×13×19.5	500×380×530 / 19.7×15×20.9
	External (mm / inch)	553x874x919 / 21.8x34.4x36.2	603x1037x1064 / 23.7x40.8x41.9	760x1105x1099 / 29.9x43.5x43.3
	Viewing Window (mm / inch)	220×300 / 8.7×11.8
	Net Weight (kg / lbs)	110 ±10 / 242.5 ±22	140 ±10 / 308.6 ±22	150 ±10 / 330.7 ±22
Electrical Requirements (AC230V, 1ph, 60Hz)		10.1A	12.4A	16A
Cat. No.		AAH82411K	AAH82421K	AAH82431K
Electrical Requirements (AC230V, 1ph, 50Hz)		9.7A	11.8A	15.6A
Cat. No.		AAH82412K	AAH82422K	AAH82432K