Ductless Fume Hoods JEIO TECH DLH-11G

State: Out of stock

ISO Class 4 air cleanliness as per ISO 14644-1. (equivalent to Class 10 as per US Federal Standard 209E)
Nominal downflow velocity. (max. 0.45 m/sec)

Warranty: 12 months

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Accessories
Comments

Safety Standards Compliance

● Efficiency and capacity of activated carbon filters : BS 7989:2001)
● Structure, electrical outlet, lighting, and sound level : BS 7258-1:1994
● Local smoke, large volume visualization, face velocity, and tracer gas
:ANSI/ASHRAE 110-1995 and NF EN 14175-1

Features

● Easy monitoring of the internal airflow speed thanks to the built-in anemometer
● Convenient change of filter cartridges by opening the upper front cover
● Fully or half openable front door for convenient transport of experimental apparatuses and equipments into or out of the workspace
● Large-capacity blower maintaining sufficient intake flow rate and reducing noise
(less than 55 dB under normal operation)
● Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity
● Built-in utility hole for easily routing the cords or wires of the equipments placed inside the hood
● A variety of filters and work surfaces available to suit your specific experimental needs (refer to accessory section)

Selection Guide for Chemical Filters

Code	Filter Name	Application
GF	Activated Carbon Filter	All common laboratory chemicals, especially VOC, Organic, Benzene, Toluene, etc
AC	Acid Filter	Acidic solvents such as acetic acid, etc
HF	Halogen Compound Filter	Halogen compounds like Chlorine, Fluorine, Iodine, Bromine, Astatine, etc
FF	Formaldehyde Filter	Formaldehyde applications
AM	Ammonia / Amine Filter	Ammonia / Amines by chemisorptions
HEPA	HEPA Filter	Biohazardous aerosols and other visible and non-visible particles (filtration efficiency: 99.99% at 0.3 microns)

Model		DLH-01G	DLH-11G
Fume HoodType		Ductless
Controller		Microprocessor control
Face Velocity		Initial set point: 0.4m/s, 80fpm
Air Flow Meter		Swing vane type
Main Filter		Chemical Filter (optional 6 different filters)
Pre Filter		Washable high efficiency nylon filter
Materials	Main Body	2.0mm steel (epoxy powder-coated)
	Work Surface	Optional 6 different work surfaces
	Window (Front / Side)	8mm / 6mm Tick acrylic resin
Fluorescent Light Intensity		> 600lux
Noise Level		55dB under normal operation
Dimension (W×D×H)	Internal (mm/inch)	880×640×800 / 34.6×25.2×31.5	1180×640×800 / 46.5×25.2×31.5
	External without Stand (mm / inch)	900×660×1250 / 35.4×26×49.2	1200×660×1250 / 47.2×26×49.2
	External with Stand (mm / inch)	900×660×1985 / 35.4×26×78.1	1200×660×1985 / 47.2×26×78.1
	Net Weight (Body) (kg / lbs)	100 / 220.5	118 / 260.1
	Net Weight (Body+Stand) (kg / lbs)	120 / 264.6	140 / 308.6
Electrical Requirements (230V)		60Hz / 0.7A
Cat. No.		AAHB2001K	AAHB2011K
Electrical Requirements (230V)		50Hz / 0.6A
Cat. No.		AAHB2002K	AAHB2012K
Electrical Requirements (120V)		60Hz / 1.3A
Cat. No.		AAHB2003U	AAHB2013U
Electrical Requirements (100V)		50Hz / 1.5A
Cat. No.		AAHB2004U	AAHB2014U