Its capacity to ground, mix and homogenize quickly small quantities of sample, make of the EQM-400 Mill your great ally in the preparation of samples. This mill has been designed for the final preparation of small quantities of hard, semi-hard and fragile samples – up to 15 g. -. It can prepare two samples simultaneously and reduce them parting from an initial size of 0.8 to 1.5 mm. until sizes of less than 10µ in short periods of time – 1 to 4 minutes -.
Due to its effectiveness/time rate, this mill is ideal for the final reduction in the preparation of samples by fusion – using grain sizes of 10µ speeds up the homogeneization of the sample in the flux, noticeably reducing the fusion times -. It is also especially recommended for preparing and mixing samples with binding agents for its subsequent analysis via X Ray fluorescence.
| Method | grinding, milling, mixing and homogeneization |
| Applications | hard, semi hard and fragile materials such as coal, coke, glass, slags, minerals, floors, ceramics, silica, blones, plastics, wood, electronic waste, chemical products, tobacco, cereals, etc. |
| Programs | five working programs |
| Speed | 100 a 2000 stirrings/minute |
| Time | 0 to 99 minutes |
| Power | 150W |
| Engine | 220V - 150W |
| Power source | 220V - 100W |
| Accesories | 50ml and 25 ml Milling Jars |
| CW Balls | Ø 10mm / Ø 15mm / Ø 20mm / Ø 25mm |
| Dimensions | 24 cm. (height) x 31.5 cm. (width) x 35 cm. (depth) |
| Approximate weight | 13kg |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
