Additional features
Unit Specification |
|
Width (mm) |
1000 |
Depth (mm) |
750 |
Height (mm) |
1800 |
Max shipping weight (kg) |
310 |
Max working weight (kg) |
550 |
Installation Requirements |
|
Power |
Single Phase, 230V, +/- 10%, 50 Hz |
Feedwater |
Potable* |
Maximum TDS (ppm) |
1000 |
Minimum inlet pressure - psi (bar) |
15 (1) |
Maximum inlet pressure - psi (bar) |
90 (6.2) |
Feedwater temperature |
1-35oC |
Flowrate |
- |
Free chlorine |
Must be dechlorinated |
SystemSpecification |
|
Pure water storage |
250 litres |
Display panel |
LCD screen |
Pre-treatment |
5μm pre-filter |
Reverse osmosis |
Low energy membranes |
Deionisation |
Optional Di packs* |
Micro filtration |
Optional 0.2μm** |
UV lamp |
Optional 254nm** |
Purified water make-up flowrate @ 10°C |
200 - 600 l/hr*** |
Purified water distribution |
Up to 3000 l/hr |
Carbon dioxide degassing |
- |
TOC reduction |
Optional* |
* 10, 15, 18MΩ.cm polishing deionisation packs available including activated carbon for
TOC reduction
** Included in BioPack
*** Softened feed water required for 600 l/hr (Integra LS). Integra LH can operate on hard water up to 400ppm as CaCO3
TreatedWaterSpecification |
|
Conductivity |
< 30μs/cm* |
Bacteria |
> 99% rejection** |
Organics – TOC (ppb) |
< 50*** |
Particles |
0.2μm** |
Endotoxins |
0.25EU/ml** |
* For enhanced inorganic and organic quality the unit can be fitted with either 10,15 or 18MΩ.cm polishing deionisers packs.
** Optional ‘BioPack’ will provide purified water with a total viable count of <1cfu/ml, endotoxin
level <0.25EU/ml and particles <0.2
*** Typical level, depends on feedwater
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.