■No.101-H TABER TYPE ABRASION TESTER
This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel. The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen. After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen. This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.
■No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)
This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.
It sucks the abraded scrap during the test. Not only that, it measures the air flow while sucking so it enables to have more precise test result.
| Model |
No.101-H
TABER TYPE ABRASION TESTER |
No.101-HS
TABER TYPE ABRASION TESTER (WITH WIND METER) |
|---|---|---|
| Turn Table |
φ150 mm
|
|
| Table Rotation Speed |
60 ± 2 rpm, 70 ± 2 rpm (2 Stage Type)
|
|
| Weight Load |
2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)
|
|
| Counter |
6 Digits Preset Counter
|
|
| Suction Nozzle |
Inner φ8 mm: 2 pcs
|
|
| Option | Inlet Pressure Gauge, Safety Cover |
Safety Cover
|
| Accessories |
Abrasion Wheel: 1 set (2 sets for No.101-H-2), Thickness Guage: 2 pcs,
Weight(4.9N,9.8N): 2 pcs each, Suction Device (Vacuum Cleaner): 1 set Power Plug Adaptor: 1 pc |
|
| Power Source | 1 Hanging (No.101-H-1): AC 100 V, 1-Phase, 15 A, 50/60 Hz 2 Hangings (No.101-H-2): AC 100 V, 1-Phase, 15 A＋7.5 A, 50/60 Hz *2 outlets required |
AC 100 V, 1-Phase, 15 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | 1 Hanging (No.101-H-1): W350 × D350 × H450 mm/ 24 kg 2 Hangings (No.101-H-2): W700 × D350 × H510 mm/ 45 kg |
W400 × D400 × H385 mm/ 25 kg |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
