• The MASTERLAM® 1.0 is equipped with a powerful central-pressure head, bidirectional rotation, variable speed and pressure. The distinctive feature of this polishing head is the oscillation function* with oscillation configurable both for amplitude and frequency.

• Use of the oscillating head will allow you to achieve unrivalled levels of performance and versatility: the quality of flatness results is improved, stock removal is increased, the service life of polishing supports is increased (uniform wear due to use of the entire surface of the plate).

• The MASTERLAM® 1.0, with the oscillation* option, is particularly efficient for polishing large-sized samples and for finishing and appearance polishing of mechanical prototypes or micro-series components.

• A stock removal control system with an automatic “stop at measurement” function is also available (accurate to 0.05 mm).

        *equipment available as an option

Les différentes têtes de la polisseuse

	MASTERLAM® 1.0 Central Pressure  head
	MASTERLAM® 2.0 individual Pressure  head
	MASTERLAM® 3.0 Combo Pressure  head

Accessories

• Automatic dosing unit DISTRILAM controlled by machine screen (4 circuits).
• Removable Ø250 mm flat lapped aluminium plate.
• Removable Ø300 mm flat lapped aluminium plate.
• Sample holders : CP (central pressure) and IP (individual pressure).

MASTERLAM® 2.0

Automatic, single-plate Ø 250 to 300 mm polishing machine, bidirectional rotation and variable speed.
This machine has all the functions that make the MASTERLAM^® range outstanding and, on this model, a specific new “combo” head.

The MASTERLAM^® 3.0 is the metallographic polishing machine without concession. Polishing can be carried out with central pressure or individual pressure and with oscillation*.
The MASTERLAM^® 3.0 is based on the same technology as the MASTERLAM^® 1.0 with, in this configuration, a powerful central and individual pressure head equipped with 6 pistons. Changing sample holders is quick and the
pressure mode is controlled directly on the screen without having to touch the head, thus, you can switch from one pressure mode to another in a few seconds.

Total versatility for metallographic research
or production control applications.

*equipment available as an option.

Available accessories for MASTERLAM^® 1.0, 2.0, 3.0

Automatic DISTRILAM^® dosing unit controlled by machine screen (4 circuits)
Removable Ø 250 mm flat lapped aluminium plate
Removable Ø 300 mm flat lapped aluminium plate
Sample holders: CP (central pressure) and IP (individual pressure)

MASTERLAM® 1.1

Polishing machine MASTERLAM® 1.0, 2.0, 3.0, and 1.1

MASTERLAM® 2.0

Technical Data

MASTERLAM® 3.0 

Technical data