CUTLAM® micro 2.0

State: In stock

The CUTLAM® micro 2.0 is a compact laboratory micro-cutting machine intended for precision cuts on the most sensitive materials. The speed range and the cutting chamber capacity make this machine incredibly versatile. You can use it for a wide range of applications with a great variety of cutoff wheels (diamond, Al2O3…) up to a diameter of 200 mm.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Comments

The sample is held in position using a vice-tightened holding arm and the wheel located outside the cutting chamber enables a micrometric movement along the Z axis; the movement can be tracked directly on the screen (accurate to 0,02 mm) Thanks to the zeroing system, very accurate parallel cuts can be performed.

A wide range of vices is available, enabling you to clamp any type of component or material. The cutting progress is either controlled manually or with a counterweight system specially adapted to delicate cuts. A rocker arm balances the implement weight, and another one permits to adjust the applied load with precision.

Technical characteristics and equipment

Fitted with a large-capacity (10 litres, large for the machine’s size), independent filtration/decanting/recirculation tank, it is easy to perform long cuts under ideal cooling conditions. The CUTLAM®micro 2.0 has been designed to simplify maintenance and cleaning operations, the base of the cutting chamber is equipped with an inlet filter to prevent the loss of small parts and components.

A 100 µm fabric filter at the decanter inlet filters out the largest particles, and the remainder of the filtration is accomplished by decanting into a compartmented tank.

Included Equipment

Recirculation system, 10 litres
Cylindrical sample holder with clamping screw: Ø 12 to 50 mm
Set of flanges: Ø 50 mm for cut-off wheel: Ø 125 to 150 mm

Options

Slow speed 50 to 1000 rpm

60 CTM 20 20
Vacuum system for holding thin sections

60 CTM 03 80

Wheel Ø	75 à 200 mm
Shaft Ø	12,7 mm
Standard flanges Ø	50 mm
Lateral arm displacement	Stroke 80 mm (accuracy 0,02 mm)
Preload weight	2 x 200 g.
Vertical mouvement	Manuel
Cooling	Recirculation system, 10 liters, Decantation tank,2 chambers, input 100 µm filter, 800 liters/min pump driven by the machine
Motor power	0,6 kW
Rotational speed	Variable, from 2000 to 4000 rpm (Slow speed in option 50 to 1000 rpm)
Protection	Transparent hood with locking system
Voltage	230 V - 50 Hz single phase
Dim. L x H x D	430 x 300 x 450 mm
Weight	40 kg
Reference	60 CTM20 00