The MCB-100 is a closed type water circulation bath for cooling/heating of external device by circulating externally the precisely temperature controlled water in the bath. The circulating capability is 1 L/min in terms of flow rate and cooling/heating capability, 52 W, assuring high performances even with compact size. It can be used in wide variety of applications, as well as for the constant temperature control of cell part in the spectrophotometer.
- Highly precise temperature control by using Peltier device
The Peltier device is utilized for cooling/heating of circulating water. With its rapid response speed, switch-over of heating/cooling can be done with high speed, allowing more accurate temperature control as compared with general water circulator using a compressor and/or a heater. The MCB-100 has a wide temperature control range from 10˚C below ambient temperature to 40˚C with temperature accuracy of ± 0.5˚C.
- Compact size allowing installation in anywhere
The size of MCB-100 is as small as 160(W) x 225(D) x 263(H) mm, 5.2 kg, allowing installation in anywhere. The MCB-100 can placed very closely to external device, enabling much shorter tubing between the MCB-100 and external device, and the circulation of precisely temperature controlled water in such external device.
- Easy and simple operation
The operation is very easy and simple. The water circulation starts automatically when the power is on. The MCB-100 has only 3 buttons, such as UP key, DOWN key and SELECT key on the operation panel, allowing anyone to operate intuitively and easily.
- Temperature sensor
The MCB-100 has an internal temperature sensor as standard for monitoring the actual temperature of circulating water in the bath. And optional external temperature sensor is also available for monitoring the actual temperature of external device.
