|
[Instinctive Operation]Visualised icons are helpful for operations. |
[Simplified definition]General test definitions are executed by following instructions on the screen using “Simplified definition”. |
[Help]The enhanced Help screen explains meanings of phrases and gives detailed descriptions of the system. |
|
[Web monitor]Web monitor allows the user to monitor excitation on screen using a LAN-based PC. |
[Report generator]Report generator saves test results and data graphs in Microsoft Word in any layout. |
A hardware mute function immediately cuts off output signals independent of software control.
Image of desk instllation : Relaxed operation on a chair
|
Basic Software |
Specifications |
Optional software |
|
SINE
|
■ Control Algorithm Swept-sine amplitude is controlled by feedback ■ Control Freq. Range 0.1-20000kHz ■ Control Dynamic Range More than 114dB ■ Operation Mode Sweep/Spot/Manual ■ Estimation Method Average, RMS, Tracking ■ Averaging Method of Control Response Average control, Max. control,Min.control ■ Number of Chs. Max.64 *May be affected by other conditions |
■ R_DWELL:Resonance Dwell ■ LIMIT CONTROL ■ A_DWELL: Amplitude Dwell ■ Multi Sweep Sine |
|
RANDOM |
■ Control Algorithm PSD of random signal closed loop control by spectrum density for each frequency segment ■ Control Freq. Max.20000kHz ■ Number of Control Lines Max.25600 lines ■ Control Dynamic Range More than 94dB ■ Loop Time 200ms (fmas=2000Hz, at L=400line) ■ Averaging Method of Control Response Average control, Max. control, Min. control ■ Number of Chs. Max.64 *May be affected by other conditions |
■ SOR: Sine on Random ■ ROR: Random on Random ■ PSD LIMIT: PSD limit control |
|
SHOCK
|
■ Control Algorithm Finite-length waveform control ■ Control Freq. component Max.20000kHz ■ Number of Control Lines Max.25600 lines ■ Control Dynamic Range More than 84dB ■ Reference Waveform Classical Shock Waveform ■ Number of Chs. Max.64 *May be affected by other conditions |
■ LONG WAVEFORM: Waveform reproduction option ■ MEGAPOINT: Mega data point option ■ SRS: Shock Response Spectrum |
|
Basic Software |
Specifications |
Optional software |
|
BMAC |
■ Control Algorithm Finite-length waveform control (based on feed-forward method) ■ Control Freq.component Max.20000kHz ■ Number of Control Lines Max.25600 lines ■ Control Dynamic Range More than 84dB ■ Reference Waveform Max.5000k points ■ Number of Chs Max.64 *May be affected by other conditions |
■ ENDURANCE2: Endurance test option |
|
Multi Random
|
■ Control Algorithm ①PSD closed loop control of the random signal ■ Control Freq. component Max.10000kHz ■ Number of Control Lines Max.25600 lines ■ Control Dynamic Range More than 90dB ■ Loop Time 450ms ■ Averaging Method of Control Response Average control, Max. control, Min. control ■ Number of Chs Max.64 (Main control channnel is Max.32Chs.) *May be affected by other conditions |
■ PSD LIMIT：PSD limit control |
|
Multi Sine
|
■ Control Method ①Amplitude ：Level control of the sweep sine by using feedback ■ Control Freq. 0.1 ～ 10,000 Hz ■ Freq. Resolution Less than 10-4 of freq. ■ Control Dynamic Range More than 114 dB ■ Operation Mode 1) Continuous sweep, Spot test ■ Number of Chs Max. 64 channels （Main control channnel is Max.32Chs.） *May be affected by other conditions |
■ Limit Control |
|
Console |
||||||
|
Number of Slots |
3 (Move slots can be incereased by additional consoles) |
|||||
|
AC Power |
Single-phase AC, 100V-240V (Auto-selected) |
|||||
|
Extension |
Connection among the unit cases (Providing support for large-scale systems) |
|||||
|
External Communication |
Contact I/O (for Emergency stop) |
|||||
|
Ambient Conditions |
0-40℃, below 85% RH, no condensation |
|||||
|
Dimensions |
430(W)x100(H)x340(D)mm（Protruding part not included） |
|||||
|
Mass |
6.0Kg (Approx.) |
|||||
|
8 ch. Input Module |
||||||
|
Number of Chs. |
8 |
|||||
|
Input Terminal |
BNC |
|||||
|
Input Signal |
Charge,Voltage,IEPE |
|||||
|
Charge Amp. Sensitivity |
1.0mV/pC or 10mV/pC |
|||||
|
Charge Amp. Cut-off |
0.32Hz |
|||||
|
Max. Input |
Charge Input ±10000pC or ±1000pC Voltage Input ±10000mV IEPE Input ±10000mV |
|||||
|
Sampling Frequency |
Max. 51.2kHz |
|||||
|
Coupling |
AC or DC |
|||||
|
Cut-off at AC Coupling |
0.1Hz |
|||||
|
CCLD Amplifier（IEPE) |
+24VDC,3.5mA |
|||||
|
TEDS（IEPE) |
Ver0.9,Ver1.0 |
|||||
|
A/D Converter |
Method : ΔΣmethod Resolution : 24-bit Dynamic Range: 117dB Digital Filter : Ripple in pass band ±0.001dB : Rejection band attenuation quantity 110dB |
|||||
|
4 ch.Input and 4 ch.Output Module |
||||||
|
Input part |
||||||
|
Number of Chs. |
4 |
|||||
|
Input Terminal |
BNC |
|||||
|
Input Signal |
Charge, Voltage, IEPE |
|||||
|
Charge Amp. Sensitivity |
1.0mV/pC or 10mV/pC |
|||||
|
Charge Amp. Cut-off |
0.32Hz |
|||||
|
Max. Input |
Charge Input ±10000pC or ±1000pC Voltage Input ±10000mV IEPE Input ±10000mV |
|||||
|
Sampling Frequency |
Max. 51.2kHz |
|||||
|
Coupling |
AC or DC |
|||||
|
Cut-off at AC Coupling |
0.1Hz |
|||||
|
CCLD Amplifier（IEPE) |
+24VDC,3.5mA |
|||||
|
TEDS（IEPE) |
Ver0.9,Ver1.0 |
|||||
|
A/D Converter |
Method : ΔΣmethod Resolution : 24-bit Dynamic Range: 117dB Digital Filter : Ripple in pass band ±0.001dB : Rejection band attenuation quantity 110dB |
|||||
|
Output part |
||||||
|
Number of chs. |
4(a channel is occupied for drive output) |
|||||
|
Output Terminal |
BNC |
|||||
|
Output Signal |
Voltage |
|||||
|
Max. Output |
±10000mV |
|||||
|
Sampling Freq. |
Max. 51.2kHz |
|||||
|
D/A Converter |
Method : ΔΣmethod Resolution : 24-bit Dynamic Range: 120dB Digital Filter : Ripple in pass band ±0.005dB : Rejection band attenuation quantity 75dB |
|||||
|
Common options |
Outline |
|
CAPTURE： Analogue waveform signal data program |
Captures an analogue wave signal, saves the signal as waveform data to use for the reference of SHOCK,BMAC,waveform controls or Random vibration PSD control. ■ Sampling Freq.: Max.51200Hz ■ Data Length: Max.5000k points ■ Number of Chs. : Max.64 ■ Waveform edit/analysis function : Filtering, Frequency Transfer processing, PSD transfer, Transmissibility ratio between channels |
|
SCHEDULER : Test scheduler |
Scheduling and execution of defined tests. |
|
Integrated Control System |
In a combined simulation system, a single PC controls, defines, and executes tests and schedules for vibration simulation systems and the temperature/humidity climatic test chamber. |
Required Specification of the PC for K2 without Energy Manager ISM-EM
● Microsoft Windows 7 Professional (32bit / 64bit)
(Windows XP Professional SP3(32bit) is also acceptable.)
● Faster CPU than Intel Core2Duo 2.0GHz is recommended
● CD-ROM Drive (necessary at installation)
● 2GB main memory resource for the application software
● One Built-in PCI Express x1 slots
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
