Gyratory Compactor to EN 12697-31, 10, ASTM D6925, SHRP M-002, AASHTO T312, inc. PC 110-120V 60Hz

State: Out of stock

One of the best methods of laboratory compaction is considered to be Gyratory for not only the material’s assessment of compactibility, but also the production of test samples. The method achieves this by the application of a vertical stress, typically 600 kPa via platens to a mass of asphaltic mixture inside a 100 or 150mm diameter mould. Whilst platens are kept parallel and horizontal, the longitudinal axis of the mould is gyrated at a fixed angle to the vertical axis.
During the test process, the height of the specimen is measured automatically and the mixture density and void content are calculated.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Comments

Compaction data is displayed in real time (graphical and tabular) and is available for download to MS Excel™ The operator has the ability to choose whether to compact for a certain number of gyrations or until a target mixture density or void content is achieved.

Features:

Full compliance to EN 12697 part 10 and 31
Configurable to comply with SHRP Superpave
Both 150mm and 100mm moulds can be tested without any modification
Automatic mould insertion and retraction
Cold mix (emulsion) materials can be compacted, with fluid collection facility
Data acquisition and control via host desktop PC
Export compaction data to MS Excel™
UKAS traceable factory calibration
Can accept moulds up to 300mm in height

Product Specification:

High stability steel frame with low flex and distortion
A 95mm pneumatic cylinder
Safety gates with interlock
Specimen table
Accurate stress control via high precision regulator
High quality inverter for accurate speed control
Specimen height measurement via linear potentiometer
Highly durable wheels for ease of movement
16bit control and data acquisition
PC included

Software:

User-friendly, intuitive and reliable Windows™ software
2 methods of compaction – no. of gyrations and target density
User guided step-by-step through compaction
Real-time display of current height, density and void content
Software communicates with the gyratory compactor via USB interface
Utilities are included for transducer check, diagnostic routines and calibration

Mô tả	Gyratory Compactor
Nguồn điện	110-120 V 60 Hz
Năng suất	Danh nghĩa 600 kPa, tối đa 1000 kPa
Loại hỗn hợp	Khô và ướt
Tốc độ máy	30 rpm
Góc quay	0.2 to >2°
Kích thước mẫu	100 and 150 mm dia
Nguồn khí nén	7-10 bar, 350 L p/m
Kích thước (WxHxL)	790 x 995 x 1920