PHENOFREE hot mounting resins
New phenol-free and formaldehyde-free thermosetting mounting resin
In line with its ecological commitment, LAM PLAN proposes on the market the first effective alternative to phenol metallographic mounting resins which are liable to release phenol (and/or formaldehyde) during baking.
The PHENOFREE mounting is intended for the technical mounting of all types of materials for material examinations or edge examinations. It smartly replaces the traditional phenol mounting resins with the same hardness and less shrinkage than a phenol mounting resins.
The range of PHENOFREE resins includes 3 coloured resins (grey, white and red) to make the identification of your metallographic samples easier. They are particularly adapted for the polishing of hard materials. The white Phenofree resin may prove to be in some cases a good alternative to the use of epoxy resins.
PHENOFREE 1
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Grey composite powder
Polyvalent, hard
|
2,5
|
06 PF010 20
|
|
10
|
06 PF010 10
|
|
25
|
06 PF010 50
|
PHENOFREE 2
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Red composite powder
Polyvalent, very hard
|
2,5
|
06 PF020 20
|
|
10
|
06 PF020 10
|
|
25
|
06 PF020 50
|
PHENOFREE 3
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Poudre composite blanche
Polyvalente, extra dure
|
2,5
|
06 PF030 20
|
|
10
|
06 PF030 10
|
|
25
|
06 PF030 50
|
Epoxy hot mounting resins
The black epoxy mounting resin is filled with glass fibres with high mineral loads. It is ideal for mountings intended for edge examinations of hard to extra hard materials thanks to its resistance to abrasion, important hardness and absence of shrinkage
Epoxy resin 633
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Black epoxy powder, loaded with glass fibres
Edges examinations
Extra hardness - No shrinkage
|
2,5
|
06 00633 20
|
|
10
|
06 00633 10
|
Epoxy resin 634
The 634 is a fine powder epoxy resin, used for examination of edged samples.
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Black epoxy powder, fine grains
Edge examinations on complex samples
High hardness - No shrinkage
|
2,5
|
06 00634 20
|
Acrylic hot mounting resins
Acrylic resin 616
The acrylic resin 616 is perfectly transparent and adapted to most materials. Mainly used to view the evolution of the grinding of the sample.
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Transparent acrylic powder
Visualising the sample during and after
the polishing
All materials
|
2,5
|
06 00616 20
|
|
10
|
06 00616 10
|
Acrylic resin 616.2
Perfectly transparent with no cotton effect, the acrylic resin 616.2 is resistant to alcohol, and therefore ideal for work with alcohol-based polishing products or requiring a cleaning phase with ethanol, isopropyl alcohol or other.
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Transparent acrylic powder
Visualising the sample during and after
the polishing
Water resistant
|
2,5
|
06 06162 20
|
|
10
|
06 06162 10
|
Copper hot mounting resin
Conductive mounting resin for examinations with SEM or electrolytic etching device. A pure copper based resin of very homogeneous consistency, the conductibility of your mountings is optimised. The use of ultra-pure materials eliminates the risk of an analysis error.
Copper resin 604.3
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Resinoid copper powder
For electrolytic polishing
|
2
|
06 00604 30
|
Graphite hot mounting resin
Graphite resin 617
Conductive phenolic mounting resin loaded with graphite (without copper and without metals or alloys) for SEM and TEM examinations.
|
Characteristics
|
Qty/kg
|
Ref.
|
|
Conductive black phenolic powder (graphite)
For SEM examination
|
1,5
|
06 00617 00
|
