Abrasive Liquid Preparations

Bio  DIAMANT®  abrasive suspensions NEODIA ® M and P

• Bio  DIAMANT®  abrasive suspensions NEODIA ® M and P
• Enhanced roughness
• Free of VOCs
• Biodegradable packaging: reduction of your activity’s environmental impact

Bio  DIAMANT®  M.M. 140 finishing liquid 

• High yield emulsion for the super finish of all materials.
• High concentration.
• Cleaning with solvent or detergent 742.

Bio  DIAMANT® Pulmatic 310 and 320P liquids 

• For large surface polishing.
• The Pulmatics are proposed in a practical packaging for a very good distribution of the product over the work surface. They are free of any propulser gas (pumped ambient air).
• Pulmatic 310 is a monocrystalline diamond liquid of a medium alcohol based concentration.
• Pulmatic 320P is a polycrystalline diamond liquid of a medium alcohol based concentration.

Final finishing liquid

Final finishing liquid

• Aqueous suspension of non-agglomerated nanometric silica stabilized in an alkaline medium. Used to carry out super finish polishings to obtain ultra low roughness. Very easy-to-use and applicable on all types of materials.
• Usage recommendation:  dilute 10 to 20% in water.

L1 finishing liquid

• Final polishing suspension specially formulated for mechano-chemical polishing. During usage, the active substances of the solution embrittle the surface to be polished, thereby optimizing the efficiency of the abrasive grains. Allows combining performances (stock removal) and polishing quality. Recommended for titanium and its alloys.
• Usage recommendation:  ready-to-use preparation

L2 finishing liquid

• Composite solution of ceramic oxides and silicas. Ideal to prepare your surfaces before the super finish step. Recommended for the polishing of aluminium and its alloys.
• Usage recommendation:  ready-to-use preparation.

ALPLAN Liquids 

• New final polishing solutions composed of aluminium oxides of a very high purity.These alumina preparations are subjected to a pushed de-agglomeration treatment, which allows obtaining polishings of excellent quality. Easy-to-use, ALPLAN solutions are usable on all types of materials.
• Usage recommendation:  use pure or diluted up to 50% with water.

I. Abrasive Liquid Preparations

NEODIA® M

			200 ml	Refill 400 ml	Refill 1 l	Refill 2,5 l
	Types	µm	Ref.	Ref.	Ref.	Ref.
	1/4 M	1/4	02 97460 80	02 97460 60	02 97460 20	02 97460 30
	1 M	1	02 01460 80	02 01460 60	02 01460 20	02 01460 30
	2 M	2	02 02460 80	02 02460 60	02 02460 20	02 02460 30
	3 M	3	02 03460 80	02 03460 60	02 03460 20	02 03460 30
	6 M	6	02 06460 80	02 06460 60	02 06460 20	02 06460 30
	9 M	9	02 09460 80	02 09460 60	02 09460 20	02 09460 30
	14 M	14	02 14460 80	02 14460 60	02 14460 20	02 14460 30

Diamond suspension / Monocrystalline product / Does not have to be agitated

NEODIA® P

Diamond suspension / Polycrystalline product / Does not have to be agitated

SERIE 310 - 75 g
Characteristics	Concentrations		Types	µm	References
Monocrystalline diamond Optimum distribution of the abrasive on the polishing supports Alcohol base	Medium		025 313	1/4	03 97313 00
			1 313	1	03 01313 00
			2 313	2	03 02313 00
			3 313	3	03 03313 00
			6 313	6	03 06313 00
			8 313	8	03 08313 00
			10 313	10	03 10313 00
			14 313	14	03 14313 00
			25 313	25	03 25313 00
			40 313	40	03 40313 00
SERIE 320P - 75 g
Polycrystalline diamond Optimum distribution of the abrasive on the polishing supports Alcohol base (free of water) Special hydrophobic products	Strong		025 323P	1/4	03 97323 00
			1 323P	1	03 01323 00
			2 323P	2	03 02323 00
			3 323P	3	03 03323 00
			6 323P	6	03 06323 00
			8 323P	8	03 08323 00
			10 323P	10	03 10323 00
			14 323P	14	03 14323 00
			25 323P	25	03 25323 00
			40 323P	40	03 40323 00

Manual dispensers to be filled

II. Final finishing liquid