SEM Probe Current Meter and Faraday cup

State: Out of stock

A low-cost 3½-digit liquid crystal display readout of Electron Beam Probe Current. The free-standing meter is battery powered and measures from below 1pA to 2μA in 5 switched ranges. The meter has automatic zero correction but there may be small residual error not exceeding 5pA at 25°C. Where absolute readings are required on low ranges this small error may be subtracted from the reading obtained.

Warranty: 12 tháng

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Comments

Ranges:
1.99.9pA accuracy +/- 5% f.s.
1.999nA accuracy +/- 5% f.s.
19.99nA accuracy +/- 2% f.s.
199.9nA accuracy +/- 2% f.s.
1.999μA accuracy +/- 2% f.s.
Auto Zero Correction.
Max error 5pA at 25°C.
Overload: In excess of 100uA.
Power: Battery 4 x AA alkaline cells giving typically 10,000 hours operation (1.2 years).
Size: 130mm(W) x 70mm(H) x 115mm(D)

Part number for ordering: 087-001 (basic unit with BNC-BNC cable only)

Faraday cup and electrical feed-throughs are optionally available

1.99.9pA accuracy +/- 5% f.s.

1.999nA accuracy +/- 5% f.s.

19.99nA accuracy +/- 2% f.s.

199.9nA accuracy +/- 2% f.s.

1.999μA accuracy +/- 2% f.s.

Auto Zero Correction.

Max error 5pA at 25°C.

Overload: In excess of 100uA.

Power: Battery 4 x AA alkaline cells giving typically 10,000 hours operation (1.2 years).

Size: 130mm(W) x 70mm(H) x 115mm(D)