LAQUAtwin is a series of pocket ION meters. Using Ion Selective Electrode (ISE) technology, they are available for measuring Conductivity, Calcium, Nitrate, Potassium, Sodium, Salt concentration and pH measurement. Using just a tiny amount of sample, the LAQUAtwin proprietary flat sensors can quickly and accurately measure the values of the chemical parameters in the field.
When flooring tiles are installed, it is very important that the subfloor level has a certain pH level. When the alkalinity in a concrete subfloor is high, it can stop the floor covering adhesive from bonding properly to the concrete. This is a problem that has only recently been discovered and the new Australian Standard for resilient flooring installation (AS 1884-2012) now says that a pH test must be carried out on a concrete subfloor as part of the pre-installation assessment.
Fresh concrete is usually very alkaline, above pH 11. AS 1884 states ‘the pH level of the concrete surface should bebetween 9 and 10’ before the flooring can be installed.
In order to determine the pH level, and hence consider whether floor installation can be commenced, the Horiba LAQUAtwin pH meter can be used.
The Horiba LAQUAtwin pH meter is used to determine thepH of the cement to prepare for floor installations. This is aneasy and quick method used to ensure that the cement is at the optimum pH.
Sand a small section of the concrete surface with 200 grit sandpaper and remove dust.
Put several drops of distilled or ‘de-ionised’ water onto the prepared surface.
Leave the drops for 60 seconds and then extract the water droplets using a pipette.
The solution is placed on the sensor of the LAQUAtwin pH meter and measured. To repeat sampling, wash the sensor with tap water and pat dry with a paper tissue.
The use of the Horiba LAQUAtwin pH meter to ensure a pH of between 9 and 10 in concrete will allow the floor-covering adhesive to bond properly to the concrete. The use of the Horiba pH Meter as opposed to using pH test strips enables the determination of accurate and reliable results.
The LAQUAtwin pH meter is small and compact; convenient to carry around in your pocket for easy on-site testing. Its easy-to-use interface is simple for anyone to use the LAQUAtwin hand held pH meter.
Effect of pH on Dissolution of Amorphous
Silica (Tang and Su-fen, 1980).
Pocket ION Meter
HORIBA’s highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware. Sensors are easily replaced as required.
Hassle-free automatic calibration with a few drops of standard solution reassures you of your measurement accuracy. Two-point calibration is also possible.
The meter and sensor are fully waterproof and dustproof, so you can take it anywhere.
The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
Only LAQUAtwin allows you to be this flexible!
Choose the best method according to your sample, your situation, and your needs.
When you're in the lab, you can test the sample in a breaker. Ensure the sensor guard sliding cap is open.
Accurate pH measurements in a few seconds, from a single drop.
Water pH varies in different environments, and a slight change can often have a major effect.
Whether you need to keep the pH of an aquarium within tight limits, are checking for the acidity of rain water or for the quality of meat and fish products, LAQUAtwin compact pH meters are ideal for you. No matter where and when you need to test.
Determine water conductivity with as little as 0.12 mL of sample. The conductivity of rain water is a trusted guide to determining atmospheric purity. In agriculture, measuring the conductivity of soil allows farmers and agronomists to determine optimum fertilizer usage and check the ‘health’ of soil after salt water damage. The LAQUAtwin meter makes conductivity testing simple, anywhere.
Only compact meter for a quick and reliable measurement of sodium ion at the scene using ion selective membrane.
Only compact meter for a quick and reliable measurement of potassium ion at the scene using ion selective membrane.
Only compact meter for a quick and reliable measurement of nitrate ion at the scene. Special application packages for crop (B-741) and soil (B-742) are also available.
Only compact meter for a quick and reliable measurement of ionized calcium at the scene using ion selective membrane.
