SLB415 with Blind Hole Load Introduction
SLB415 load cells are made from nickel plated tool steel but are hermetically sealed, something normally available only on higher end stainless models. This protects the load cell from damp for the best stability and measuring performance. Use SLB415 load cell in platform and floor scales. Due to the hermetic welded design reliability in most industrial environments is guaranteed.
SLB415 with EVK and Base-Plate
The Expansion and Vibration Kit (EVK) in combination with a base plate is a cost-effective solution but without any saftey feature!
The Expansion and Vibration Kit (EVK) contains of:
SLB415 with FKT
The Foot Kit (FKT) can be used for Floor Scale application when high accuracy matters.
The Foot Kit (FKT)
SLB415 with EVK for top mounting
The Expansion and Vibration Kit (EVK) can be used for top mounting application. It is a cost-effective solution but without any saftey feature!
It has a low profile for direct integration into your weighing system.
Maximum Capacity | 110kg - 4.4t (500lb - 10000lb) |
Hazardous area approval | ATEX, FM standard on each load cell |
Các ứng dụng | Platform and floor scales, silo, tank, hopper and conveyor |
Phụ kiện | Base Plate Kit, Foot Kit, Expansion and Vibration Kit |
Cable length | 3m, 5m, 10m |
Protection class | Hermetically sealded, laser-welded, IP68, IP69K |
Material | Nickel plated tool steel |
Phê duyệt | OIML C3, NTEP III M 5000 |
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.