The Agilent HS-32 Diffusion Pump

State: In stock

Available in 2 in. and 16 in. through 35 in. sizes, the low-cost HS-series pumps provide high speed, low ultimate pressure, high throughput, high tolerable forepressure, and low backstreaming. The HS-Series diffusion pumps come with full thermal protection and optional quick-cool coils. The 16 in. through 35 in. pumps come with sight glass/fill and drain assemblies, and are available with ASA or ISO flanges.

Warranty: No warranty infomation

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Comments

Features

Five-stage stainless steel fractionating jet purifies pumping fluid.
Full thermal protection.
Fluid-level sight glass provides quick indication of pump fluid level at all times.
Fill and drain assembly for pump oil.
Optional halo baffle cold cap reduces backstreaming without adding height.
Standard gauge port (NW-25) below inlet flange included.
Optional quick cool coil.
Please note that this item is controlled for export by the Nuclear Suppliers Group. Accordingly, you may be required to obtain an export license from the U. S. Department of Commerce prior to exporting this pump from the United States. Please consult the U. S. Export Administration Regulations, ECCN 2B231, for further guidance.

Order Information

Part Number	Description
K1856332	Halo baffle, 32 inch for HS-32 diffusion pump
K7247001	Heater clamp plate, HS-32
K7246001	Heater crush plate, HS-32
75792001	Heater insulator, for HS-32 pump
X3900-68003	Heater wire, 10 AWG, precut 196 inches, for HS-32/HS-35 diffusion pump
647332010	Heater, HS-32 diffusion pump, 240 V/ 415 V/480 V, with leads
647332075	Heater, HS-32 diffusion pump, 240 V/ 415 V/480 V, without leads
L6383010	Heater, HS-32 Diffusion Pump, 400V 4000W
L6383011	Heater, HS-32 Diffusion Pump, 440V 4000W
647335020	Heater, NHS-32 diffusion pump, 200 V, 4000 W
647335010	Heater, NHS-35 diffusion pump, 240 V/480 V, 4000 W with leads
K0377167	O-ring kit, for HS-32 diffusion pump
K9050004	Thermostat, lower switch, set at 288 °C, for HS-32 diffusion pump

Technical Specifications

Pumping Speed, Operating Range Pumping Speed, AVS 4.1 (1963)	17,300 l/s Air, 21,625 l/s He and H2 32,000 l/s Air
Maximum Throughput	30 T-l/s (40 mbar l/s) in operating range, 35 T-l/s (45 mbar-l/s) @ 0.01 torr
Operating Range	1.7 x 10-3 to
Maximum Forepressure	No Load: 0.50 torr (0.65 mbar) Full Load: 0.35 torr (0.45 mbar)
Recommended Backing Pump	ɛ300 cfm (510 m3/hr)
Backstreaming Rate, Standard Cold Cap
Warmup Time	60 minutes
Cooldown Time	180 minutes
Fluid Charge	3 U.S. gallons (11.3 liters)
Electrical Requirements	3 ph, 50/60 Hz, 240/415/480 VAC
Pump Power	24,000 watts
Cooling Water Requirements	4 gpm (800 l/hr) at 60-80°F (15-26°C)
Water Connections	3⁄8 in. FPT Tee
Recommended Fluid	DC-704