AGC-100 is a single channel controller compatible with the FRG 7xx, PVG-5xx, PCG-75x and CDG-500 series of active gauges and automatically identifies the active gauge connected.
AGD-100 is a low cost single channel display option for the FRG-700/702, PVG-5xx and PCG-75x series of active gauges.
Both units have user selectable measurement unit (mbar, Torr, Pascal), and adjustable setpoint control.
| Part Number | Description |
| AGC100 | AGC-100 active gauge control unit |
| AGC100ADPT | AGC-100, front adapter |
| AGD100 | AGD-100 active gauge display |
| R3084301 | PCB assembly, dual convection gauge, XGS-600 gauge controller |
| R3075301 | PCB assembly, hot filament ionization gauge, XGS-600 gauge controller |
| R3080301 | PCB assembly, inverted magnetron ion gauge, XGS-600 gauge controller |
| L6426301 | Rack Mount Kit, XGS-600, Dual |
| L6422301 | Rack Mount Kit, XGS-600, Off-Center, 19 in. |
| L6423301 | Rack Mount Kit, XGS-600, On-Center, 19 in. |
| R3124301 | Tilt stand accessory, XGS-600 gauge controller |
Technical Specifications
| Measurement channels | One (1) |
| Measurement range | 2 x 10-10 to 1500 mbar (1.5 x 10-10 to 1125 Torr) |
| Measurement unit (selectable) | Mbar, Torr, Pascal |
| Rate A/D Converter |
10/sec 16 bit |
| Setpoints Setpoint relays Channel assignment Relay contact Hysterisis Contact rating Connector |
One (1) One (1) Potential free change over contact Adjustable 30 VAC/1A; 60 VDC/0.5A D-Sub, 9 pin, male |
| Display | LED |
| Analog output Range Connector |
0-10.3 V, sensor analog output signal D-Sub, 9 pin, male |
| Supply | 90-250 V, 50/60 Hz |
| Consumption | < 30W |
| Operation Temperature (ambient) | 5 to 50 °C |
| Digital Interface (AGC-100 only) | RS-232C ; D-Sub, 9 pin, female |
Outline Drawing
Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.
