Vacuum Desiccator JEIO TECH VDR-30G (Round Models)

State: Out of stock

Round design featuring light weight yet high tensile strength.
High-quality silicone O-ring and specially designed ‘Locking Clip’ allowing outstanding vacuum capability with virtually no leakage.

Warranty: 12 months

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Accessories
Comments

● Maximum vacuum of 1 Torr(1.33×10- 4 Mpa) for 72 hours.
● High quality silicone gasket ensures greaseless airtight seal for the clean and cost effective test environment.
● Highly transparent, shatterproof, non-corrosive, and easy to clean polycarbonate construction.
● Three-way stopcock provides great convenience for consistent and uniform vacuum draw, vacuum release, or gas exchange.

The barbed fitting on each side secures attachment of tubing.

● Flange lock holding the top and the bottom together during non-vacuum conditions.
● Various models available with respect to sizes and UVblocking effect.
● Minimizing damages or discoloration of light-sensitive samples (only for U/UG models).
● A vacuum gauge attachable at the center of the lid for easy vacuum level checking (only for G/UG models).
● The top and bottom of round vacuum desiccators and cylindrical vacuum desiccators are compatible with each other for diverse use.

Model		VDR- 20/20U	VDR- 20G/20GU	VDR- 25/25U	VDR- 25G/25GU	VDR- 30/30U	VDR- 30G/30GU
Internal Volume (L / cu ft)		6 / 0.2		10 / 0.4		20 / 0.7
Gauge Range (Mpa)		0 to -0.1 (Analog)
Nozzle (mm / inch, Ø)		9.5 / 0.37
Max. Permissible Vacuum (Bodies)		1.33×10-4 Mpa (Analog)
Material	Lid / Bottom	PC (Polycarbonate)
	Perforated Sample Tray/ Drying Agent Tray/ Locker	PP (Polypropylene)
	Vacuum Seal	Silicone Rubber
Dimension (I.D.×H)	Exterior (mm / inch)	Ø242×279 / Ø9.5×11	Ø242×354 / Ø9.5×13.9	Ø308×325 / Ø12.1×12.8	Ø308×400 / Ø12.1×15.7	Ø385×399 / Ø15.2×15.7	Ø385×475 / Ø15.2×18.7
	Net Weight (kg / lbs)	1.5 / 3.3	1.7 / 3.7	2.5 / 5.5	2.6 / 5.7	4.2 / 9.3	4.3 / 9.5
Cat. No.	Without UV Block Effect	AAAD2011	AAAD2021	AAAD2111	AAAD2121	AAAD2211	AAAD2221
	With UV Block Effect	AAAD2031	AAAD2041	AAAD2131	AAAD2141	AAAD2231	AAAD2241