Viscometer Heating Baths JEIO TECH VB-25G (25L)

State: Out of stock

Ultra precise temperature control with excellent visibility.
VB-G Models provide superb temperature stability as well as crystal-clear visibility required for kinematic viscosity measurement using glass capillary viscometers.

Warranty: 12 months

Price: Contact us

Order

Delivery time: 8h00 - 18h00 daily
Genuine product, provided width CO, CQ
03 months of free warranty for consumable and accessories
12 months of free warranty for main equipment
Accessorie's price is applied only when purchased with
main equipment
Contact us for any particular accessory's quotion

Email: info@redstarvietnam.com Every day in week

Features
Specifications
Downloads
Accessories
Comments

Operating Features

● +5℃ above room temperature to 150℃.
● Microprocessor PID control / Automatic tuning / Calibration.
● Digital timer for delayed ON/OFF. (from 1 min to 99 hr 59 min)
● Protection against over-temperature and low fluid level.
● Convenient memory function of up to three frequently used temperature settings.
● Digital LED displays.
(0.01℃ resolution at 0~99.9℃ and 0.1℃ resolution at 100~150℃)
● Splash-proof keypad.
● Simple conversion between Celsius and Fahrenheit.
● RS-232 interface.

Constructional Features

● Crystal-clear visibility provided by double tempered safety glass windows in front and rear sides.
● Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
● Optimal temperature equilibrium achieved by a vane type stirrer with strong circulation power.
● Operations at below or slightly above ambient temperature allowed by the included stainless steel cooling coil. (for operations from 10℃/50℉, use an optional cooling circulator)
● 51mm Ø holes (for glass capillary viscometer tubes) and a 12.6mmØ hole. (for a thermometer)

Model		VB-25G		VB-40G
Bath Volume (L / cu ft)		25 / 0.9		40 / 1.4
Working Temperature Range ²⁾ (℃ / ℉)		Amb. +5 to 150 / Amb. +9 to 302
Temperature Stability ¹⁾(±℃ / ℉)		0.05 / 0.09		0.1 / 0.18
Dimension	Bath Opening / Depth (W×L, D) (mm / inch)	145×265, 330 / 5.7×10.4, 13.0		295×265, 330 / 11.6×10.4, 13.0
	Cover Lids / Hole for Thermometer (mm)	5ea / Ø51, 1ea / Ø12.6		8ea / Ø51, 1ea / Ø12.6
	Overall (W×L×H) (mm / inch)	492×374×547 / 19.4×14.7×21.5		642×374×547 / 25.3×14.7×21.5
	Net Weight (kg / lbs)	28 / 61.7		37 / 81.6
Electrical Requirements (230V)		60Hz, 13A	50Hz, 13A	60Hz, 13A	50Hz, 13A
Cat. No.		AAH43301K	AAH43302K	AAH43401K	AAH43402K

* VB-25G and VB-40G Models are available ONLY for 230V.
※ Bath fluid : water
1) Technical data according to DIN 12876.
2) If you want to operate the unit below Amb. + 5℃(Amb. + 9℉), an optional cooling circulator is required.
The lowest temperature when using an optional cooling circulator is +10℃ (+50℉). For ordering information, see RW model page